Search results

http://www.shoptronics.com/2wiauvisebrt.html?gclid=CIKOi8Wz5Y8CFQ1kWAodbzIoCA You'll still need a cable or could even get away with a vcr, but anything to convert the current cable signal to Composite Video and Analog Audio. And you'll need a remote to work it all.

Bob's answer above still remains the same....:)

This model does not support video up converstion. you need to go to model TX-sr605... Look at the tx-sr605 manual page 24... it explains the video up converstion that you are looking for... it receiver converts everything to hdmi for the video out no matter what you throw at the input...

Don't change anything... just add the Analog Red and White from the Audio out of the VCR to the VCR input on the HTR. Disregurad the Video unless you are using other Video product through the HTR and you want to keep the HTR on all the time and the Video Switching all through the HTR. Otherwise...

1. Are we talking Cable or Satellite? 2. Are you connections from the Cable or satellite box analog or digital? 3. Are you going directly from the Cable box or Satellite receiver to you yamaha? 4. Model numbers of yamaha and Sat/cable box? My first guess is you have cable... That's...

Is the Cable box your only Video source? There's no reason you can't stay with componet video for your HD. The 3805 does also convert all you incoming video signals to component so if you still have a composite device in you system you can get away with just one component video line from your...

The d-link server would transfer you mp3's over the network either wired or wireless. The Media Server has a Digital output. It would replace your cd player as you have already converted (ripped) your cd's to mp3. Really cool part is you can see all your songs, photos' and videos stored on you...

Since the Device you have your Mp3's are stored on outputs analog, changing it to digital via a analog to digital converter isn't going to help you at all. You are better off just staying with the analog connection as the device is outputs. You must have your mp3's stored on your computer...

85db sensitivity on your new speakers is very poor.:frowning: I would try to return/exchange those for a speaker above 90db prefreably 92, you will notice a big difference.

Yeah that sounds a little high for the labor end, but given the fact that you purchased the equipment yourself you are probably getting the full labor rate ( I'm at $90/manhour) since the A/V guys are not making any profit off the sale of the equipment. Hanging a screen requires 2 guys on the...

First what was the ohm rating of the original outdoor speakers? If they were 4 ohm and the new ones are 8ohm that's the first issue. Then you have to look at the speaker sensitivity. It would take 4 times as many watts to drive a speaker with a sensitivity of 86dB than it would one with...

Are you planning on doing this installation yourself? If not I would just get a few quotes from local Audio/Video companies. (not big box retailers) Check you local yellow pages. or online yellowpages for businesses in you area. Most A/V installation companies will be happy to come out and...

Another solution to the IR Repeater is an RF Remote such as the Home Theater Master (made by universal remote). You would eliminate all you current remotes, learn the IR into the new remote. The Remote sends the IR via RF to a base station (MRF-350 also from universal remote). You still need...

Are you getting the same results from all video sources? DVD,Cable/Satellite,VCR or any other Video source you have connected? Is all your video connected through an A/V receiver? (in other words are you using the same input on the projector and switching sources through your receiver) I...

Just buy a digital Modulator use the video and audio out from the digital cable box to the modulator and make that say Channel 120 (cable freq). Split the incoming cable with a 2 way splitter. Send the full signal to the new digital cable box. Install your low pass filter on the other side. Then...

What is your screen size going to be? That will determine where your video and power should go. I would just run one 5 conductor RGB cable to the projector. That is all you will ever need. Along with an Electrical outlet in the ceiling next to the video run.

Here's the proper throw distance for that setup based on a 110" screen Your power and video should be in the ceiling 15.5 feet from the screen wall. http://www.stevenleellc.com/sony.pdf

I would run one 5 conductor RGB mini RG59 coax.

That is the reason that high end recievers will have what is called "input volume trim level adjustment" for each source.:)

Try the old 3 prong to 2 prong adaptor on whatever has a 3 prong plug (ground). You have a ground loop usually the only thing that has a 3 prong plug is causing the problem.:)

Depending on the selection of the Projector and what Inputs are available on the projector will determine what video feeds you will need. You should only need two at max. HDMI and VGA to keep it simple for the computer connection. All the rest of your Video should run to your receiver first...

Check your Private Hometheater Forum Email. I sent you my business email address. I'll see what I can do with the picture.

ok just one more:)

All taken at the BigBang Fireworks show in Milwaukee, WI using Canon EOS D20 in full Manual. 1/20th sec./F3.5 ISO 1600

My Favorite Taken at the Big Bang using Canon EOS 20D, full manual mode with ISO set to 1600, no Tripod used.

Yes your answer is on page 30 of the user manual under "sound fields"

If your Audio for your cable is connected directly to the tv you will need analog right and left to the HTIB/DVD player in the Aux input. I'm assuming your cable box has analog audio out if it's UK and only optical digital out then you have another issue as the HTIB/DVD player does not have an...

Actually my coffee just kicked in... you dvd player would be putting out 480p when in progressive scan. (I'm thinking 1080i or 1080p yes it's too early) It's not an upconverting dvd player. You can try a couple things... If you know anyone else that has an hd set take your dvd player...

The 3 volume control wires are what you need at the equipment location. They are the ones that feed your volume control locations. The other 6 speaker wires are for other speakers in the room where the equipment is, probably for 6.1 surround sound. If there are no speakers in the room where the...

I would suspect the quality of the TV. I've been installing TV's like forever and never even heard of that brand. What is the model #. It may only be 720P and not 1080i. Model of TV would help. I see Target and Circut city carry those.