Search results

I think there is something wrong with the sub preout. I read the entire manual and followed every step. I turned the subwoofer to on and still nothing. Also, now i am hearing an annoying noise through all the speakers. You can't tell when the volume is up, but on low volumes the speakers make...

I am still working on getting it hooked up to the reciever. In the meantime let me know what you think of the sub. The video is just the sub hooked up to my computer. http://realmofexcursion.com/videos/S...agnum12.17.wmv 8 mb just to let you know.

nvm it wasn't working properly. I was getting a little music out of it but there is this continous humming noise coming from it. Does anyone know how to turn that off?

It is something with the speaker options. let me play with them. Right now I have bass coming from reciever with no speakers!!!HAHA. But I am getting closer. I have a question though. It sounds like my reciever is sending highs to the bass also. Will that damage the sub?

My subwoofer amp is plugged into the same power strip as the reciever. Also, I tried turing on the different speakers labeled A and B and still nothing. I am thinking there is something wrong with the reciever and I am just out of luck.:thumbsdown:

got any idea how to fix that? I know I can't be hooking it up wrong. It works fine when hooked up to my computer using mostly the same cables. Also, I followed to instructins perfectly on how to set it up.

I did exactly what the manual said to do. All i got was 1 tone around 50hz that is played. For some reason i am not getting anything from the sub out. I am so confused to what it could be.

VR-206. Also, I lost the instructions. I am sure they would be of great help. It is very old though and I have no idea where they could be if I even have them.

Alright guys thanks for the help. I hooked them up to my video1 input on the reciever and 4 of the speakers are working great. These are my 2 problems as of now. I have a behringer amp powering a sub. For some reason when i plug the mono RCA cable from the subwoofer out to the input on...

It is old. It has dolby 3 logic and dolby 3 stereo it says.

http://www.caraudio.com/forum/showth...61#post1582561 That will show you my reciever and my tv back panel. Sorry for making it so difficult.

Here is a link to my TV so you can better help me. I am not quite sure what you wanted me to do there. Sorry, I am just a super noob at this. TV Let me know if that gives you the info you need to answer my question.

I am trying to hook up my new surround sound system with my sub. The problem is i don't know where to go from here. My tv has 2 left and 2 right speaker outputs. I hooked these 4 outputs to my recievers 4 inputs. My reciever also has a Center speaker, and subwoofer input. The problem is my tv...

That was an impressive response. The problem is I get these subs vertually free and I don't have a place to get speakers from. That is why it seems as if I am just going bass crazy. Thanks for all your help with the sub reviews. I have a lot to learn before I will be able to get a great sounding...

I was just told tuning a box to 20hz wouldn't sound that great when music was played on that sub. That is what the person making my box told me. By all means let me know if that is untrue. Money isn't much of a problem. I mean I don't want to be spending thousands, but any sub in between the...

Also, you said the output at 20 Hz wasn't that great with the setup I gave you on the mag. I think part of that is due to the fact that I want to be able to play music too on my HT, so I didn't want to tune the box that low. Let me know if that is why it isn't getting a huge amount of output at...

Well I am pobably going to end up putting the mag in my car. 2 of the 12's actually. It is just in my HT for now. What do you think of the Adire HT drivers. I was thinking of getting a 15" tumult in the near future. In case you don't know you can find all the specs you need on it here. Tumult...

Someone reccommended that I ask about the HT sub I choose to use. First off this is what I have/am getting. What I have so far for my sub. HT SUB My other stuff I Bought Already. Amp for sub TV Stuff I will buy Speakers (2 of them) I do have an older kenwood surround sound...

My bad. I will be hooking it up to a 56 inch JVC hdtv. Not sure if it is any good or not but it looked really nice at the store. As for the sub. I know the owner of the company and many people use that particular sub in home theaters. The thing is I want to use it for music and for HT so i am...

My bad haha. Too much time working with cars. I meant kenwood reciever. Let me fix that.

What I have aleady purchased Stereo Integrity Mag 12 BEHRINGER EP1500 EUROPOWER POWER AMP (1400rms at 4 ohms) Mono RCA Cable What I will be purchasing. 2 of these Speakers I have a Kenwood reciever that I will use to power the speakers. Let me know what you think for my first HT...

I use ebay all the time. I will check out their store and see if I can get that same reciever that I showed you guys on there for maybe a little cheaper. Thanks for the help and before purchasing anything I will run it by you to tell you what I decided to go with.

.harmanaudio.com/search_browse/product_detail.asp?urlMaterialNumber=HK%203480-Z&status= How about that one. I would deff. like something like that. Just let me know if it would be perfect for my speakers. Once again you need to type in http and the www thing before it since I am still not...

I would like to go as cheap as possible on the reciever. I will checkout the website that you listed. Let me know if there are any other cheap places I can look. As for budget. I am going to need to spend 300 total atleast to build both those speakers and would like to keep the total money...

That is good question. Right now all i want is stereo. Someday I will want to have surround sound. But I was thinking if i wanted to do surround sound someday, would the yamaha recievers i listed be high enough quality to have a good surround sound system? They are the cheapest ones they make...

Yamaha RX-V457 6.1 Channels Receiver Yamaha RX-V557 6.1 Channels Receiver Yamaha RX-V550 6.1 Channels Receiver Those are the 3 ones I have looked at so far. Let me know which one you think would be best for 2 of those speakers I showed you. It should be a fun first project for me. As...

put a http in front of that link. I am a new user so it won't let me post links yet.

//speakerbuilder.net/web_files/Projects/D3/dayton3.htm That is what I am thinking of doing for speakers. Let me know what you think. I will power it using a yamaha reciever. So I will have the Yamaha reciever, an amp to power the mag 12 sub, and i will build 2 of those speakers that i showed...

I have a SI mag 12 hooked up to an amp right now. It is all hooked up to my computer. What I want to do is add speakers to it so I can actually hear some music. For those of you who don't know the sub is running at about 1400rms. I am looking for small speakers since space is limited. Also, i...

Ok I get it now. I have been building enclosures for a few years now so it isn't a big deal to me. I do understand that there is extra labor involved when buying a raw driver. I guess if you don't know anything about box building then it is better to just pay more and go with one that comes...