Morning, I would like to clean my crt lamps and inside of my screen on a Pioneer SD643. What is the best way to get to these to clean them? Any pitfalls I should watch out for? Thanks, Steve:)
Morning, I built a 214L Adire align ported. I asked the same questions. Responses were that the "egg crate" foam was more for standing waves and that it was not needed for the low frequencies of a sub. I also think the "fill" is for loading to make the enclosure larger in volume. 2 cents:)...
Thanks, They look like nice speakers and the data looks impressive. However I noticed on the GR web site taht they work with an optimum distance from the ceiling of 16". My ceiling is 17' so Im not sure how things would work out. I may try the Audax surrounds and see if they sound okay. At...
I have a mix n match setup. Center is an Audax HT diy, fronts are Vortex Screens and the sub is a 214L Adire Tempest. Any suggestions for diy surrounds? Any input would be appreciated.;)
I feel the box vibrating. There is no wood to wood vibration. I think the addition of another layer of MDF would reduce it considerably however it is already VERY stout. Once I have put the final veneer on it I will post pics. Thanks for your response and good luck with your box!:emoji_thumbsup:
Morning, I recently completed the basic box for the 214L Adire alignment. But wonder if anyone has tried using acoustic foam to line the box? I emailed Adire tech and they had not tried it. Also I used the recommended 3/4 MDF and feel some vibration on the box. Would another layer of 3/4...
Morning, New to the Forum so if it's an old question let me know. I'm building a 214L vented Tempest. Adire calls for 64 oz. of fill. I would like to use 1.5" acoustical foam to line the box as I did wiht my Audax center channel. Will this change the amount of fill needed or completely change...