Search results

I have never heard of that brand before. If I were you I would get a Raybestos or OEM ;)

haha My pleasure

you would be crazy to pull the tranny twice. change the clutch, machine the flyweel, and change the throwout bearing while you have it apart.if you are sure that it is not the oil pan gasket I would be willing to bet it is the rear main seal. The clutch is not hard to replace after the trans is...

On the Paseo, you are able to pull the tranny with the engine installed. You want to ensure that the engine is supported well and that you will have the ability to lower the transmission side of the engine to allow the tranny to clear the wheelwell

Does anyone know if the ES model is Slink-E compatible? I have an older model and it will not work because it has to be a "master" instead of a slave changer

you normally don't have to go to the dealer to reset the light just diconnect the battery for about 15 seconds should clear any error codes

little bit of rage there huh? I always thought you had to be licensed to drive. most people on the road are FSCKing idiots. especially californians I have not seen one on the road that should have their license

here in maryland they love to drive at dusk withPARKING LIGHTS on. I guess they think it save the life of their headlights

Thank you both for the quick responses. I found out over at AVS that they are in fact interchangeable and the 07MS tubes are just a brighter version

since it is my first post I will be brief. I have two projectors, one is a sony vph 1040 and the other is an Electrohome ECP-4000/4100?? the sony has 07MS CRTs and the electrohome has SD187s. From everything I have read the two are interchangeable.My reason is the tubes on the ECP are burned so...