i think i am most interested in cleaning up my video sources with perhaps holo3graph II video processor, it sounds like a hot lick , but im not sure if its going overboard... i have a projector with vga dsub input at best, its a mits xd300u.. so can i get a computer built with this in mind?
i would like to get a htpc -custom built , or a nice pre made in -a- box deal, that is the most cutting edge. i have a dvr , so it is not my main concern , however i would like to be able to copy (backup) some dvd's. can anyone point me to some people who make the coolest rack mountable units...
no im not a semi literate tinkerreerrer, more a fumbler. i can install a new hard drive, or load software, thats about my limit. config /set up other hardware , im in the dark. i dont care where someone is, just that they know what they are doing in a set up. remotes- i already have pronto...
a question now - if i am running a mits xd300u projector off of the htpc, via 15pin dsub , can i get a better than 525p rez from dvd , and sat broadcast ? and upconvert my directv tivo signal ? would a scaler do that ?
that would be great , ...if i only knew how to put one together... of course id pay for their time... i just want a knowledgable HT builder , not a BESTBUY kid :) ! anyone -anyone ? Bueller ?
go to boatingstore.com /my company. we have drink holders in black and white plastic. for furniture ,as long as there is no mechanics in the arm, you can cut an X in the fabric smaller than the dia of the holder, remove padding within the area of the hole, use hole saw to cut frame to make...
Tom - you can get an in line fan booster at home depot that will increase the cfm's from your duct ( runs all the time). also try to resrict some of the other ducts in other rooms via the vent cover plate louvers while opening the HT rooms wide open , this will also help .
guys- i actually have an account (im in boat supply sales)who buys resin from me , and uses it to make acoustic panels for offices and auditoriums .. they take the rigid fiberglass panels(comes in 4x8 ft sheets i think), and coat the edges with polyester resin, which makes a nice hard sharp edge...
my room is 19.5 long ,13 wide (only half the length of the room),10ft high, but i have a 1ft soffit running around the perimeter of the room about 1 ft from the cieling, AND toward the screeen area where the main speakers are, to the right is a consession bar, that opens the room up to 19ft wide...
i am building my theater room NOW , have pics would like to show , im a decent builder, not at putting pics on a webpage, could someone tell me the easiest way to get some pics on the site here? thanks.
could someone out there with some past experience fill me in on what would be a good timbre match for surround in- wall speakers for my aerius i and cinema center. fyi i also have a svs 2935pci sub. thanks!
im glad to hear everyone would rather have a wood floor than slab, helps me decide on what to do now that im getting ready to change my garage over to HT .
i think it is more in the processing of the video , since it is not a constant . i dont see it on ntsc broadcast or directv, just under prog scan dvd . and i thought to rule out contamination because it is a clear line wave hardly noticable and every few minutes, wouldnt a signal contamination...
when viewing dvds from my prog scan sony 755 through my xd300u mits projecter, i see a wavy line , or ripple effect , not staticy but clear wave that slowly rolls upward across screen every few minutes. what is this ,can i fix it? thanks Darron Link to E-Bay auction removed by...
i have the same prob when viewing dvds , but not directv it seems. is it progressive scan ? its a slow moving wave that moves upward every few minutes . how can i fix it?
YES - ! i figured it out tonight ,then came home to read the last post -thanks . it was the problem , the high dollar dvd player of my uncles wasnt up to par .... i took my player and it worked great. you know that damn X1 looks just as good from 12 ft away as my xd300 u or any other dlp for...
building theater in the garage, currently a cement floor. option A - to leave cement and carpet over thus creating no vibration transmission from subwoofer, or option B - to make a floating plywood deck , mounted on rubber blocks,and not screwed to walls (to prevent walls and house from shaking-...
cant figure this out , i tried to hook up my uncles infocus x1 from dvd component to the computer in on the x1 via component / hd15 breakout cable. no signal ! frustrating, not even manual slection on the menu will recieve the image. i thought it was the projector , so he took it back and got...
you have invested alot of money in your theater , you invite relatives and or friends over to watch a movie, they are your guests , any food available should be allowed for them to have . if you have people that just hoard it up, maybe you need to find different friends who would appreciate it...
the main floor of my theater should it be concrete or should i build a floor over existing slab with 2x4s and 3/4 ply - either way it will have carpet and padding. im just wondering if i want that vibration that is emitted from my subs that i currently get in my living room wood floor, i am...
wow really that much power? i have a pioneer elite vsx 36tx - puts out 100w - so if got the sunfire with 200 w per channel , still not enough ? maybe better idea would get a 2 channel monster 300x2 to run the mains, and run the surrounds off of the 100w reciever ? next question - good 2 channel amp?
wondering if it is ok to run two amps , one from reciever hi out to speaker to stator ,and one from separate 2channel amp connected via line out on reciever to a bi -wired martin logan speaker woofer . im only putting out 100w per amp channel on each. want to get more power for my listening...
want to buy a new reciever.narrowed it down to 3 - looking for owners opinions . i have martin logan aerius i mains, cinema center . boston surrounds . thanks!