I have upgraded my system to the 4ES model and I am using my older 444ES to power an additional set of L/R surround speakers. The 4ES whisper quiet but the 444ES has a hiss at -15 decibels in analog direct mode. Are there any 444ES owners that have had it serviced for this hiss problem? Does...
Zack, I just packed it... It sounds like your's does the same thing. Alright. Do this test for me (if you don't mind): TEST 1 1. Set up your speakers for Surround Back L/R "Yes" which will enable the use of both back surround speakers. 2. Set the SB Decoding to "OFF" 3. Check the...
Zack, It does make a cliking sound when switch the L/R back surround to "YES" and "NO". I contacted Sony and they informed me that there should be no audio bleeding to the L/R surround back speakers when SB decoding is not engaged. Last night I tested Star Wars EpisodeII with no surround...
I did some further testing and this is what I found. I am using two speakers for the L/R Surround Back. I disconnected the the right back surround allowing only the left to act as a single center back channel. I changed the set-up for the surround back accordingly. This configuration worked...
Everything is correct as far a speaker connections go. The only time the surround back is disabled is when I turn it off in the set-up menu or listen to 2ch.
Zack, This happens in just plain Normal Surround>ProLogic mode and 5.1 modes. It seems that the surround info sent to the back surround L/R correspond to the surround L/R with 5.1 sources, respectively. I prefer to have the Surround Back speakers completely off when I'm listening to material...
This quesstion is concerning the Surround Back mode. I noticed on my 4ES that there is still surround information in the back surround speakes even when SB decoding is set to "OFF". Shouldn't these speakers only engage when the Surround Back mode is "ON"? Is this a normal for the 4es or is the...