Thanks Allan
Since I'm homebound kind of on my own, I dont know when the second vcr to try will reach my home. So I will "try testing the rest of the system."
I will "disconnect the dvd player S-video cable for just a few minutes and connect the dvd player to the HTB video 1 using the same...
Answers to ted lees questions: No problem with dvd watching I have tried other vcr tapes The tracking has been adjusted No cable box Switched dvd & vcr input on the htb and the dvd plays fine. Question: Since everything for the vcr is hooked up to video 1, and with video 1 on the...
thanks to all for your ever willing help. This is how the vcr is set up now: Red & whites audio out vcr to hts receiver in video 1. yellow video out vcr to yellow video in hts receiver. monitor out to video 1 TV. turn receiver to video 1. tv on video 1. vcr on. play. get sound and a non...
Hello Brent
As you suggested, I took the yellow directly to TV video 2.
I get sound and trying to be picture when the TV is on video 2 and the receiver is on Video 1.
If receiver is on Video 2 there is NO sound and same type of picture effect as mentioned.
TV Zenith A32B41
VCR Zenith...
thanks Parker. Before the HTS, I had DVD play on S-video 1 TV setting and the VCR played on Video 2 TV setting. With the HTS, there is no picture on either of the two settings; but there is blaring sound from the vcr on these settings when the receiver is on. When I use the Channel 3 setting...
#1 Out to receiver MD/Tape and #2 in to receiver Video 1 are the rca plugs. I followed your directions, Brent, and (the #1 out to receiver MD/Tape plug mentioned above is now connected Video 1 receiver).The VCR in and out rcas are connected to the in and out video 1 on receiver. Now i'm...
I am a homebound person who was fortunate to have help hooking up a lo end hts. everything works but the vcr. This is how its connected. Everything comes from Aux 1 on the vcr. #1 Out goes to receiver MD/Tape. #2 In goes to receiver Video 1. #3 Out yellow goes to TV Video 1. Antenna IN to...