I have just purshased these less then a month ago. Probabley about 10 hours total usage on both. All in original boxes with reg. cards and manuals. $1000.00 for the 1066 $1750.00 for the amp
I also have a hum in my speakers.I purshased the HTS5100
but like you no luck.My voltages are between 121 and 124
usually.I have a Rotel RMB 1095 amp.I did find the hum
diminish when I used a cheater plug.Now I have to put my ear right up to the speaker to hear the hum.seems to come
out...
Thanks guys;
I would be interested in the ground loop isolator,where
I would be able to purchase one,and how they work.
By the way Tim Wyatt at Rotel Answered my 2 e-mails tody in about 20 minutes.I just wanted to say thank you for your help.
I did take off my home made cheater plug and...
I used a small one outlet surge supressor that I had at
work and cut the ground off and the humm is barley audible now.Still there a little.Tell me if this is ok,
where my amp plugs into the power center is where i put the
plug.seems to only come from the horn tweeters.
I did notice when I had the 1075 the power cord was not a
grounded one,so no humm/buzz?The store where I bought the amp said to use a cheater plug,that they do it all the time?I did e-mail rotel so lets see what they say.I also thought the $700.00
Monster power center I use would have helped.
Hey all.
Well I just went and did a swap from a Rotel RMB 1075 to an RMB 1095 amp.With the 1075 connected I did not hear any kind of buzzing noise at all.But now the 1095 is giving me a kinda loud buzz out of all my speakers.I do not have a dedicated circuit for my system.I do use a Monster HTS...
Hey all;)
I have been reasearching my HT system for a few months.
Just became a member to the forum and wanted to thank everyone for all the useful information posted here.
Well Here is my system:
Rotel RMB 1075 5ch amp
Rotel RSP 1066 Processor
Monster cables
Klipsh RF7 front
Klipsh RC7...