Search results

I'm thinking of upgrading my Technics pro logic"SA-AX620" receiver and was looking at the 5560. And was wondering if it does HD component switching?And if this is a good receiver to upgrade to.Thanks Panasonic 47WX51 Technics SA-AX620 RP56 120L 12"DVC Sono Sub PE 250watt plate amp...

I was wondering If someone could tell me what 120L sono sub with an old svs driver in it with a 4" flared port at each end 18" total length would be tuned at?Thanks alot.

I will be going with the sealed because i built an E center around my widescreen and have opening's in it for my mains that are only 30" high.The reason I did this was because I only had a 6' wall to work with.All my gear is above the TV.

Drew i'm also starting to build the 281 sealed version.I have a 120L sub with an old svs driver.I'v heard nothing but things about the 281's.I'm looking forward to them.I'm also going to be using a 281 for a center. I was wondering what difference there will be if i put the 281 sealed on it's...

There's 3, 1 1/4" dowels centered evenly 2 1/4" long.Just a 2 1/2" screw through the double mdf and 1 1/2" screw from the bottom up.It's good and steady.

I'm powering it with a mcm 250 plate amp.The grille I picked up at a surplus store. I routered out a 1/2" buy 1/4' deep slot around so the grille would sit almost flush with the top. There's 4 black drywall screws that go through the grill and through the port flare to secure it good.It's...

http://members.rogers.com/sfyoung/ricksub.htm DVC 12" 16" 120L 4" flared port 18" long Tuned to just under 20hz Sounds great!!

Ron how does your sub sound with the bass boost enabled?

Dustin i'm looking forward to your comparsion with your tempest.

Those are some KICK ASS looking subs i love em!!!What material did you use for the sock?I'm thinking of using some stretched black velour

Dustin how long are you making your port.I'm making the exact sono as you?thanks

Ron did you leave the bass boost enabled?Just asking because I have the same amp

WinISD tells me to use a 4" X 17" port to tune my 130L sono to 19hz.Is that a straight port or flared in the program? I have a 4" flared port coming from PE so if thats not calculated in WinISD how do i find out the correct length with flared port?.thanks alot

I have a 45w pencil tip soldering i found here will that be ok?And was also wondering If i left the boost on would it hurt anything?Thanks

Yes i just got mine from mcm and would also like to know Mike's question.Thanks

Mike what fabric did you use on the outside of your tube and where did you get it?Thanks

Does anyone have an idea how long the port is in the svs 16-46cs.I have an old svs driver. thanks

Do any of you guys know the name of the fabric that svs uses on there subs and where to get some.I'm looking for something like it.It doesn't have to be exact.thanks

Can someone recommend some good binding post for my sono sub and where to get them thanks.

This is my first sono sub i'v built.I'm very new to all this. It's a 12"Dayton I have the tube cut at 16" X 40.5 = 128L. I'm putting a 4" X 16" port in which will give me around 19hz, I think.Now my ? is I picked up some flared pvc ends for a 4" pipe at a flea market.If I put these on...

How does it effect my sub if I add flared ports?I know it increases air speed.But will it lower the bass also?Thanks

With the end caps of my sono sub. I'm having 3/4" inside the tube at each end. I was wondering if you guys just glue them or do you also nail or screw them also?Thanks

Just ordered 2 of these puppies!!

So is this driver pretty good compared to the 12"Shiva?Was thinking of getting a shiva,for my sono sub.Thanks

So is this good that there's no boost."i'm just building sono sub now and have ordered this amp.It's all pretty new to me.thanks

Yes i would also like to know .If anyone has a link to there canadian site?thanks

I ordered 2 ,Did you guys get an e-mail with a tracking#.I havn't yet

Do i need the port flared on both ends or just the end inside the sono?thanks

I just ordered this amp online.will I be able to run 2 subwoofers with it?

I'm going to be putting a 4" port in my sono sub.What should I use for the port and where do i get something flared for the ends thanks.