Looking for either a Bravo D1 OR d2 OR mOMITSU 880. HAVE ENOUGH dvd PLAYERS but would like to have 1 do to 1:1 pixel map. momitsu or Bravo that skips or has trouble reading DVD's are welcome. Cheaper the better. Thanks.
Just received a 92"(45"x80") Video Spectra(1.5 gain) Da-Lite Picture King screen. This is a Video Spectra material screen mounted on a large tripod. I realized after I set it up, that I needed to go a different route with my screen and have to go manual pulldown as the tripod makes me have...
Can not change the location, so this is where it will have to be. Some weird stuff. Ran the plot with ALL speakers running, 80hz xover, Ascend 340 mains good down to 50hz or so. Made 1 bfd filter so far with a -14db cut @ 37 hz, badnwidth like 8 or so, and a boostof 8db @ 27HZ, bandwidth @ 4...
I have a pre owned 16-46PC+ on the way to go with my new Ascend 340 LCR's. I live in an Apt, unsure of room size I am guessing 16x12x9. I don't need sheer SPL, more intersted in the low low end. Originally I was going to get a new 20-39Pci, but was able to get the 16-46pc+ foe same price...
Still in market for an SVS sub. Considering 20-39 PCi(cs), 25-31Pci(cs), 16-46Pci(cs)or possibly a PB10-ISD. Located in Northern NJ, metro NY area and would prefer local if possible.
Seeing if their is any interest in a MINT 7 month old pair of JBL E80 mains for pickup in Northern NJ. Never pushed (live in Apt) and have included spikes. Asking $285 for pickup only (too heavy to ship). Will also do the 80's with an EC35 for $400 firm pick up only. Will not sell center...
Seeing if their is any interest in a MINT 7 month old pair of JBL E80 mains for pickup in Northern NJ. Never pushed (live in Apt) and have included spikes. Asking $285 for pickup only (too heavy to ship). PM me.
Since I am having a bit of trouble locating any Pci series in my area, I would also consider a PB-10 ISD located anywhere. Please let me know if you have one to sell. Thanks.
Looking to sell my Dayton 10" sub (pickup only) in Northern NJ area. Purchased back in April?may 2005. Unit is MINT, never been pushed (in Apt setting). Asking $100
Looking to buy a very good condition 20-39pci in the metro NY/Northern NJ area (to avoid shipping). Also consider 20-39 cs w/amp,16-46 PCi or CS as well. Looking in $300 range. PM me Thanks.
Buffalotech wbr2-G54 wifi router. WPA as well as AES encryption Unit is Mint. Flashed with latest firmware. Includes router, Ac adapter and Cat 5 cable. Does not include original box. asking $45 shipped in Continental US
Fixed ground hum with cheater plug as many suggested. Re-Plotted my sub + mains Pio 1014 set to -15 Now could use some filter advice from the gurus. Thanks Dayton 10" + main BFD passthru
Ok, until I get rid of the hum, I can not use the BFD. However, I have ploted my Dayton 10" and would like some advice from the Gurus on setting some filters to tame my room. Come take a look please and don't be shy: Dayton NO EQ
Ok, went out today and bought ratshack rca-1/4 plugs: http://www.radioshack.com/product.as...5Fid=274%2D320 As son as I plug connect my receiver poutput to either of the inputs, I get a humming noise thru my speakers (even before sub is powered on). Both with BFD on and off. Did I buy...
Have my Dasyton, have my BFD and a Pio 1014. Should I BFD my sub, set the filters, THEn run MCACC or should I run MCACC1st, then play with the filters? I imagine I should BFD 1st, then calibrate via MCACC.
Now for Sale only. Canceled Dishnetwork and have a 522 that I will not be needing anymore. No balance on receiver mint condition (except the warning sticker on top of unit, tried peeling it off) Have both remotes, but no manual (can email PDF). $160 shipped UPS ground.
I like to back up my kid's DVD's so I can keep the originals safe from little hands. Right now I have an older Samsung DVD player that handles older 2xs media ok, but not doing well with newer 8xs DVD + or - Rs. Anyone reco a good, fairly inexpensive DVD player (preferrably with 1080i...
as I was when I bought my Samsung 3295HF 3 years ago. Yesterday, the power board died on me and would cost around $500 to fix. Def. not worth it. Went out and bought a Sony KV32HS420 last night and bought the 3 year warranty for $150 and have every intention of renewing it in 2008. I...
Well, my samsung 3295HF which was to be 3 years old in about a week took a crap 10mn before the cable guys arrived yesterday to install an HD DVR. Yep, no extended warranty and it seems it is the powerboard that went (like on so many others) and that would be at least $500 to fix. Deciding...
Ordered it yesterday. 1 question, which actual sub is used? I know PE ofers several 10" subs, just wondering which one is actually in their 10" 100 watter (you know the one I mean). Thanks.
Which is better for those that have heard both? Looking for accuracy and tightness, not muddy boom boom. Obviosuly E250 is roughly 2xs cost of Dayton. Can anything touch the dayton in $150ish range? E250 would be at absolute MAX end (or maybe even beyond) budget for this.
Ok, got it last night and set her up. MUCH more involved then my old 811. Did a basic trial run thru with MCACC. Set ALL my speakers to large for some reason (jbl E80,s EC35 center, e10 SURROUNDS, n24 REAR SURROUNDS 8"HK SUB). Will take a while to really dial this in. Overall sounded...
Well, looks like I just can NOT wait for 3-4 months for the 1015 to come out. Decided I really don't NEED the 3rd Comp ion (would be nice, but not a must). Wife wants to get me whatever I want for our aniv and my bday which falls roughly same week. $400 is pretty much MAX $$ amt, so 1014 fits...
My sectional is about 1.5' from rear wall. This weekend I will be connecting my JBL E10's and mounting them to the side walls. I have JBL N24's that I am going to use on stands for rear surrounds. Sicne their is not much room behind my seating position, I am thinking of having them firing up...
Anyone run a 1014tx with a JBL Eseries setup? I am trying to wait it out on the 1015tx (for the 3rd comp only really and wouldn't even use it much). Getting tougher to wait becasue my wife wants to get me the receiver for our anniver and my bday (1st week march). Doesn't look like 1015...
Phil was nice enought to help me out in the last thread about surround speakers. Decided on JBL E10's that will be place very high on the walls, to the side and facing listening position. I was going to place them slightly behind listening area until I decided to splurge and pick up a pair of...
I will be wall mounting my new JBL E10's for surrounds. I live in an apt, so I am limited to using my white, flat speaker cable. Obviously, I am going to have to run the wire up the walls. I am wondering what you might sugest I use to secure the wire to the wall so it does not flop around...