Search results

i can not find anyinfo on a denon 2801 is the one or im i getting jerked around

where is the best place to put a 2nd powered sub???

my dvd player has a built in digtal decorder and my reciever has the inputs for it i understand what you have said and yes i selected the 5.1 format i thought about equipment settings to, so i put in gladiator and it sounds great with the same settings. im lost would it have anything to do with...

i just watch blade and the audio format was "dobly digtal 5.1 home theatre surround sound" thats word for word the was no separtion in the rear speakers. only the music played from the rears and some sounds were very very fant from the center speaker( like gun shots )and some sounds did not...

was this a good buy? my reciever does not have a digetal in only 5.1 channel inputs so i bought a dvd player with a digtal decoder with 5.1 outputs and it also has two digtal outs 1 for cable and 1 for optical is this a winner? a denon sales rep says no

what are the pros and cons to replacing a woofer with another woofer from say radio shack? what is the difference between a ht woofer and a car audio woofer?

i have a infinity infentisamal powered sub the sub blow out so i replaced it with a new sub from radio shack. it now sounds better than the old one that came factory installed the sound is not over powering and blends very well. so is there a differnce between a car audio woofer and a home...

im going to purchase the denon 2802 and i need some info on etronics anyone buy from the online???????:emoji_thumbsup: or:thumbsdown:

do they have a 6.1 channel dvd player if so were and how much? if not i am looking for a dvd player for my denon 2802 budget is 250

quote from bobby: but at $749 its probably not an authorized dealer. i found the 2802 denon for 569.95 at etronic.com my question is what does it matter if its an authorized dealer or not?

this is a quote from harmans web page on their new line of recievers: A new era dawns at Harman Kardon, as it proudly introduces its first A/V receivers to incorporate 7.1-channel surround-sound processing. now 5.1 channel is your two fronts a center and your left and then right rears...

my question is whY ARE YOU SELLing??? and would you sell the infinity center channel seperatly??

specs on the denon 1602 i have bought the denon 2802 and for a fewmore c note's (100 dollar bill) it was well worth the money Dolby Digital, Dolby Pro Logic II and DTS A/V Receiver • Dolby Pro Logic II, with Cinema and Music Modes • Dolby Digital and DTS decoding • 24 bit DSP...

this area is cool idea what prices are 6 ohm speakers ????? i need some info on the pros and cons of 6 ohms and 8 ohms

also i have one s video on my tv do i run my svideo from my dvd player to the reciever and then to the tv or what???? another thing do the make a s video y conector. you know if you have one s video (like i do)and you need two also which is better to use the s video out, or the other...

im wondering when i get my denon 2802 and my speakers cani still use the old rca cables (youknow the kind you get a walmart) or should i cet new cables the ones with the gold plated ends look nice what is the diff.

if my memory serves my right the higher the independance the less likely you will have a roll over effect from another freq right????if the front operates at (lets say an independance of 90) this is good right? you want higher independance on your speakers right? not lower. do you want higher...

i am going to purchase a denon 2802 reciever which puts out the amplifier channel power is as follows front: 90 watts x 2 (8 ohms 20hz - 20khz, 0.05% thd) center: 90 watts (8 ohms 20hz - 20khz, 0.05% thd) surround: 90 watts x 2 (8 ohms 20hz - 20khz, 0.05% thd) surround back: 90...

1. what is 6-ch analog ext.inputs????? 2. what are anolog pre outputs used for??? 3. what is the diff between compoiste video inputs /outputs and componet video inputs/outputs??? i have an idea on componet video inputs/outputs but which do i use lets say for the vcr for example (lets...

how about bookshelf for fronts?????? well they do the jobin the front?????

nominal impedance says 4 to 8 ohms on bose bookshelf is this good??? for 79.99 ea. my reciever puts out more power on less ohms so to me this sounds good. is it???? reciever is denon 2802

i see the word bookshelf alot is there a difference in these speakers and full standing speakers for a home theater system?????? besides price

$ 250 buget for fronts any ideas???????

well i found out that my amp was bad.if you listen really close we could here a faint poping sound when we powered it up. and also found out that it is a infinitesimal subwoofer by infinity. (it was noted on the inside ot the amp (how strange for them to put it there) i posted a new thread on...

Guys today im going to get it tested today (the sub sure made the weekend a long one)and and finally someone is open to take it to.i will post the final result when i return thanks for all of your info.here is the last thing i tried. the dasiy chain theroy, it was a bust. when i did...

the prices i got were from there web pages so i am sure that a lower price is out there question howcon people mark a price down ir the manufactor is asking a higher one???? this is something i would like to know

MARK YES THAT SOUNDS JUST LIKE IT. damn caps button. driver faceing; or on the front. air port on the bottom. i can not find a manuel for the thing! an ideas where i could get one online????? i have already tried infinity, and they do not have one. i think, or i know it works; it is just...

bruce im trying this one more time all inputs for speaker wire and no outs i-------i i _ i - i / i i _/ i i i i-------i left i _ i i / i + i _/ i i i i-------i i _ i i / i i _/ i - i i i...

sorry it did not work i was trying to draw a outline

bruce are you saying that my sub only haveing highlevl inputs (no outs) could work as the in coming from the reciever and the outs to the speakers?????? sounds crazy but believable lol the exact text on the high level inputs are as follows: high level inputs Low Level...