Search results

Brian, Sent you an email re the Monster Power Center Aaron

Thanks anth_c. Do you know what ga. the wire is? The Bryston needs at least 22ga. Aaron

Hi Guys, What if you need the mini jack on one end and bare wire on the other (Anthem D1 going to Bryston amps)? Are there ready made cables like that? Thanks, Aaron

Hi Drew, Sent you a PM. Thanks, Aaron

Hi Guys, Let's try $2800 including shipping within Canada. Thanks, Aaron

^^ Thanks

Still looking for a buyer.

Hi Guys, I'm lowering the price to $2800 (Canadian), and would consider shipping. Thanks, Aaron

Hi Miles, That works out to a little under $2100 US. Aaron

Hi Guys, I'm selling my Bryston 9b-st. It's a black, 19" version with handles. The grounding system was recently updated to that of the SST line. Face is clean (couple of small scuffs on side) 8/10 condition. Used in smoke free, pet free, child free environment. Approx. 14 years left on...

Lee-M, Sent you a PM. Thanks, Aaron

Nevermind:) I shut everything off, and when I turned it back on the DVD-A indicators were giving off their pretty glow. Thanks, Aaron

Hi Guys, I just bought my first DVD-A disc (Diana Krall's When I look in your eyes). When the disc is playing, should the blue DVD-A indicator light be on? Also, should the "DVD-AUDIO" be lit up on the front panel? Neither of these indicators are on, so how do I know if I'm getting DVD...

Got the email. Thanks again Brian!

Thanks Brian! Please send it to [email protected] :) Aaron

Hi Dean, I've had one of these for about a month and it has already crapped out. The VCR part still works, but I get a message that reads "C007" when I try and use the DVD. The new issue of DVD ETC. has an article on DVD/VCR combos, you might want to check it out. Good luck, Aaron

Thanks for the clarification Paul.:b

Thanks John! Incidentally, I had a Rogers Cable tech. here today who thought it would work. When I said that I had heard that different cable companies use different encryptions, he said that was a myth. I always trust the info I get here over the info from Rogers. Aaron

Hi Guys, Rogers offers a Scientific Atlantic box for digital cable. I was wondering if any of the new STBs from Toshiba, Samsung, etc. will work with Rogers? Thanks, Aaron

Hi Guys, I have a Panasonic RP82 that is showing these flashing symptoms on my Hitachi 57swx20b. Is there any fix for this problem? Thanks, Aaron

Hi guys, I got my amps back from the exorcists at Bryston today, and the hum is gone. They found that one of the RCA plugs on the 3bsst was slightly stretched. They didn't think that that was what was causing the problem, but they replaced it anyways. Thanks for everyone's help and good...

Thanks Karl:) I'm hoping to have another "Bryston's service is the best!" story for you guys soon. Aaron

Hi Guys, The amps are going in to Bryston today for a check-up. I'll let you know what happens. Thanks, Aaron

Hi Guys, I found the problem! After several hours of plugging and unplugging, I found that it is the proximity of the two units that is causing the problem. If the 9b is turned on within 7' of the 3b, the speakers from the 3b start to hum. My new problems are: 1. my rack is only 5'...

Hi Chu, I don't think there was anything new, but would it matter since the HT has it's own circuits (15amp for lights and recliners, and, 15amp for the AV equipment)? Thanks, Aaron

Mike, The conflict seems to be between the 3b and the 9b. The hum is there only when the 9b and the 3b are turned on. The hum is coming through the speakers attached to the 3b and it goes away if I turn off the 9b. The 9b just came back from Bryston where they changed the grounding and...

Hi Guys, Thanks for the responses. The hum is still there even with everything disconnected from the 3802 (I've even tried unplugging everything from the outlets including the 3802). The hum stays until I turn off the 9b. Does anyone know why re-grounding the 9b the same way as the sst...

double post

Mike, I emailed them last night, but haven't heard back from them (which is completely uncharacteristic of Bryston). If I don't hear back from them by Mon. afternoon I'll assume they didn't get my email and try again. Aaron

Hi Guys, Just some more info... When I disconnect one of the interconnects between the Denon 3802 and the 3bsst (so there is only one connection between them) the hum goes away. Mike, I'll try moving the 3b to the back tonight. Aaron