Search results

Unfortunately not at this time.. The distance from wall to wall is only about 13ft..Toss in a couch and TV width and I only have about 10.. Besides, I might be moving next spring and dont want to put any more holes in the walls if possible... thx for the comment Mark

75 looks and not a response?? help a guy out here....

Hey all, I have been out of the HT arena for a while due to a new child... Long story short, my 50"/15yr old/Hitachi Ultravision RPTV has just about had it. I have been holding out for a while because of the changes involved with a new tv. Here are the specs I am looking at: Price Point...

If your talking about the little beveled piece of "rubber", it looks fine...

I changed cables and lo and behold, ny sub started working. I didnt think it was the cable so I changed it back to the old cable and it continued working. I reran the LFE Test sweep off the AVIA disk again (100hz down to 20hz) Everything sounded fine until it hit around 38Hz. Then I started...

Rory.... as in a bad servo...or one that was not engineered quite right and Velodyne users have to live with??

thx for the info.... I will give it a shot

Edward... Thanks so much for the help....you have answered a lot of my questions. For 2 more data points....My sub is corner loaded (45 degree is correct I assume) and the diagonal distance to the sweet spot is ~~ 12' Since SVS gives out there infamous 45 day "trial" period, I guess the...

Edward, Thx for the input. I am looking at replacing a broken Velodyne FSR12.(wish I could find a schematic for the entire box and I would fix it myself)..I digress... I am trying to put the term "dynamic limits", into something a little more tangible to understand... Lets assume the...

anyone??

Hey All, Easy question here... I listen to movies almost exclusively at around Ref-10 to Ref-15db in a 14x25x8 living room. Is the PB10 enough to fill this room or would I be taxing it too much?? (I am not sure how to read output levels on the provided graphs) The WAF is pretty good...

A little follow up: I double checked the amp connection and the connectors seems fine. The wires go down into the driver area through a small hole and I cant see how they are attached. I took a look at the front cone and rubber material and all looks well. I unscrewed the 6 bezel screws on...

Hey All, I am trying to get my FSR-12 up and running so I can sell/replace her with either a PB1 or a PB10. If anyone can give some "shadetree mechanic" help on the symptoms below, I would appreciate it. (all settings on the receiver and the sub are correct and have not been touched in over a...