It's an aliasing problem as Jason Borchers describes above. I compared the new DVD to my old Laserdisc version and the problems are identical on both. Viewing the DVD progressively scanned I see the same artifacts as I do on the Laserdisc when viewed interlaced. Too bad as we have been waiting a...
All of the geometry settings are adjustable with analog controls. It's been a long time since I looked at one but I think if you pull off the speaker grill on the front-bottom of the tv there is a panel which hides the adjustment controls. You should look for the geometry controls such as pin...
Jason, I would add the Sony VPL-HS20 to your consideration list. It is a 1386x788 LCD with 1300:1 constrast ratio and 1400 ANSI lumens brightness. Check out www.avsforum.com for a lot more info on this and the other units you have listed. Bob
Check out the numerous reviews of the HS20 on www.avsforum.com. It is getting very good accolades and is much improved over the HS10. There has been no mention of the power problems with the new unit. I personally own a Sony VPL-VW10HT and upon seeing the new HS20 plan to upgrade. My unit is...
Barry, A good place to read about projectors is avsforum.com. For your type of setup a front projector is the way to go if you want a real movie theater experience in your home. RPTV just aren't big enough to give the visual experience IMHO. I personally have a theater in my 13ft x 18ft room...
Jeff, Do you know if the 12HT uses the same case and lens as the 10/11HTs? I currently have a 10HT and might be interested in upgrading if I could simply swap it out without having to change my mounts, etc. Thanks, Bob
Chris, 1) The RC codes are for a wired RC system that are generally used on real high end systems. For most of us a Phillips Pronto can be programmed to be just as functional for less than 1/10 the price. 2) The two wattage ratings are for two different impedance speakers. Most speakers...
Kevin, In order to go the satelite route you will have to spend approximately $500-$700 on equipment. This would include an elipitical dish and HD receiver that will decode everything (Off the air analog, Off the air HD, Normal digital satelite channels , and satelite HD channels). You would...
Kevin, I have a 10HT and a 110" Grayhawk and I would suspect all of your problems lie with your cable company. The 10HT has very good composite video performance. My cable company is Time Warner here in Houston and their digital channels are pretty good on my 10HT via composite or...
Dave,
My boxes are general instrument which is now motorola. Here's what they are specifically:
http://gicout50.gic.gi.com/GIHomepa.nsf/?Open
http://gicout50.gic.gi.com/GIHomepa.nsf/?Open
The HD decoder has a switch on it that can select 4 different output modes. These are as follows...
Below is an excellent site on making high quality video/coax cables. I have used these instructions with great success.
http://www.bus.ucf.edu/cwhite/theater/DIYCable.htm
Bob
In Houston I get the following from TWC:
CBS - 1080i
ABC - 720p
PBS - 1080i
NBC - 1080i
FOX - 480P
HBO E&W - 1080i
SHO E&W - 1080i
Their implementation consists of a digital cable box that outputs a digital HD signal to a separate HD decoder box. The HD box then connects to my...
I had a similar experience with my 4802. The default setting for audio in for some of the inputs is analog not digital. In order to enable the digital input you need to press the INPUT MODE button on the remote after selecting the appropriate device (DBS, DVD, VCR1, VCR2 etc). This will take...
---Is it still advisable to use "Monitor Out 2" on the 4802, to avoid video interference?---
If you want to bypass the OSD you can use the monitor 2 outs. I have not noticed any signal degradation however with monitor 1 outs on my VPL-VW10HT on a 110" screen.
Here is what the manual says...
The on screen display (volume and other displays) only works through the S-Video or composite video outputs. If an input signal is put to both the S-Video and the composite at the same time it will output only to the S-video output.
Bob
Tyler,
One thing I would seriously consider adding to your purchase is a KLF-C7 center channel to go with your 10's. It also is no longer being made and you will never have the opportunity again to get a center that blends as well with your mains.
I use a KLF-C7 with my Chorus II's and love...
Have you tried taking the pre-out for your left effects channel and connecting it to the main in for your left amplifier channel. If you do this you can determine if the problem is in the pre-amp section or the amp section.
The "known" problem with the V1 relates only to the Left, Right, &...
Keith,
--- Bob, I'm wondering something, now I've seen some interesting typos and misspellings, but how did you go from used to youst? Just curious. ---
That is why I got an engineering degree in school vs. an english degree. Sounds like you went the english teacher route.
Bob
[Edited last...
Donny,
I too bleed Yamaha. This is a big part of my dilema relative to going over to the other camp. I have played with the center eq and many other things and have improved the sound but for whatever reason I can't get it to sound as good as the 2095 even with lots of tweaking. I have even...
Chris,
I find your comment interesting about the center volume originally sounding low. That is the same impression I originally had. I determined however, that the volume wasn't lower, it just sounded that way because the sound wasn't as clear/intelligible. I have done alot of tweaking and...
Chris/Donny,
Have you noticed any difference in the way dialog sounds that comes from your center channel from the new Yamaha's (RX-V1/V3000) vs. your old 2095? I too have recently upgraded and I don't think the dialog sounds as clear/intelligible/natural on the new V1 or V3000. Music however...
Klipsch has recently quit making the Legend line and as such there are some good deals available on them right now. ubid.com has had them on their website regulary for the last month or so. If you watch closely you might be able to get a good price from them. You also get Klipsch's 5 year...