Search results for query: *

Robert, please check out this official Outlaw 950 link, it should answer any question you will have about its inputs and outputs, as well as sound processing features.

Ah, so when I turned off the Surround Rear speakers, that took away the other 6.1 soundfields. Okay, thanks. I thought I did something that took those soundfields away, now I know I did. :D

Quick question: Where have my other soundfields gone? When I play a DVD with a DD 5.1 track (using the optical 1 input), I am stuck with only DD 3/2.1. In the manual, it says I should be able to press the "Dolby" button, or the "dts" button, or the "Cr Surr" button to cycle through the...

Brian, you can teach any button (except the 8 DEVICE buttons on the top of the remote) on the 950 remote to act like another button, so you should be able to teach the T/V button to act like the "Multi" button. Don't rely on the remote codes to provide button mapping for your particular...

Step 5 is not in the Outlaw manual, and thus I failed miserably trying to copy buttons from an original remote to the 950 remote before reading Bill's post (so I will have to give it try once more tonight). Thanks for the write-up. But I did figure out how to "map" a device to another device...

Just FYI: Here's what I have hooked up to the 950: Panasonic RP91 DVD player JVC XV65GD DVD player (I use this for Non-R1 DVDs) Pioneer CLD-D704 LD player Panasonic VCR Philips VCR (I'm a time-shifting fool with another VCR in the bedroom as well). The 950 remote control was not...

Here's my cursory user review of the 950: Now that I've worked most of the bugs out of my understanding of the unit, it's not too shabby. The DPL II is pretty good, you can change the depth of the front soundstage, and you can control the amount of the center channel info that's mixed...

I just want Truth-in-Labelling!

Maybe my expectations are different: When I select the 6-channel analog button on the remote control, I want all 6 analog channels to be bypassed/sent to the outputs going to the amps. It should not matter if I was previously in the 2-channel analog bypass mode (of any of the various analog...

Okay, for some reason, I had the 6-channel input on last night with the problem, but I tried it again today, and that did the trick for me, but I must say, I'm a bit disappointed that you can't cycle the source buttons on the face of the 950 to get to the 6-channel analog input. If you have a...

I have a problem with the 6-channel input mode: In the 6-channel mode, I only get passthrough for the front left and right channels, and the subwoofer channel. I get absolutely no output/passthrough from the center channel, nor the 2 rear channels (I've turned off the rear surround...

Is it just my unit, but I have to really crank up the volume to get acceptable loudness when watching anything through either of my VCRs. I've heard the new units have 0.5V less gain (from 1.5v to 1.0), but is this what's causing the low gain? I've got the volume indicator at around -12dB to get...

Bill, thanks for the info. I really was hoping this SL-9000 remote variation would allow for re-assignment of devices on each of the device buttons. I have printed out the SL-9000 remote owner's manual, so I'll see if I can do it without that fancy dancy LCD that the real SL-9000 has. I just...

Anyone have any luck getting the 950 remote to mimic remotes of different gear with any devices except for the VCR and DVD buttons? I succeeded in adding the remote code for my Panasonic RP-91 to the DVD button, and my Panasonic VCR to the VCR button. But, how do I enter the code for a...