What's new

Search results

  1. Allen Ross

    Center Channel Project finished after nearly a year of work.

    Looks nice, hope it sounds as good as it looks.
  2. Allen Ross

    Speaker construction

    make sure you got a decently powered router too. Those lock miter bits are mighty heavy and it takes some nut to spin them. I almost wished I had something bigger then my PC 960 for my 1/2 shank MLCS lock miter, i did turn the speed down though.
  3. Allen Ross

    Sony receiver not working as a sub amp - help!

    been there done that, now a few less hairs on my head
  4. Allen Ross

    Linkwitz Transform

    i would agree, but also look at the extension of the driver and power on the amp to be sure that you can use a LT.
  5. Allen Ross

    DIY home theater receiver cooling

    i think you should add some fans to that router for when you are surfing the web hardcore :D Sounds like another successful mod, congrats.
  6. Allen Ross

    Frequency tunning.

    so were the simulations you did correct?
  7. Allen Ross

    Frequency tunning.

    you could just give us the alignment of the box and the TS prams of the driver.
  8. Allen Ross

    Small monitor sugestions

    I can def do an active cross over cheaper then a passive one, I have about 30 BB op amps sitting right here i got as free samples. The caps and resistors, even nice ones shouldn't run me more then 50 bucks, wafer board and PS shouldn't be more then 30ish so I am still a head of the game compared...
  9. Allen Ross

    Small monitor sugestions

    my biggest thing is power absorption of passive xo, and there's some things that you just can't do in passive
  10. Allen Ross

    Small monitor sugestions

    benefits of active cross over, plus I have never done it.
  11. Allen Ross

    Just finished some GR Research A/V-1's.............

    they don't know how good they have it, you are one good son.
  12. Allen Ross

    Need some 4 guage banana plugs.

    may i ask why you need 4 gauge wire?
  13. Allen Ross

    Small monitor sugestions

    anyone have a suggestion?
  14. Allen Ross

    Small monitor sugestions

    I am upon my next project. I am looking to build a pair of mini monitors, two way actively crossed. I am looking for extension on the lowend but nothing to big for the enclosure, I know I am asking for best of both worlds but I know there a some ideas out there. I was looking at the Adire...
  15. Allen Ross

    Need some amp suggestions!

    why not look at Crowns DC line? two of the 300s can be had on ebay for around 500 shipped, and will be around 600X2 (4 ohm load I am guessing). Also look at THD of whatever amp you are looking at, even though they are powering subs, no one ever wants distortion. (i am not a big fan of...
  16. Allen Ross

    Check out my (almost) finished GR A/V-3's!

    if they are small enough in size (under 200K apiece) email all you want to me and i will host them for you
  17. Allen Ross

    Wood?

    MDF, might be heavy to work with, but if done properly will be rock solid and it's soo soo cheap.
  18. Allen Ross

    HIgher education.

    the average person isn't gonna spend the time jumping from site to site covering the vast majority of information, plus if the salesman knows what he is talking about, he will make the sale rather then saying, this one will sound great.
  19. Allen Ross

    Amp kit for bass shakers

    if you want to try your hand at building an Amp Check out Chipamp.com the LM3875 stereo kit would do you just fine, all you would need is to get a transformer, some wire, RCA and binding posts, and your choice of case. theres tons of info out their under the term Gain Clone. all could be had...
  20. Allen Ross

    serial controls standard?

    never said the concept was tough, it was how each company twisted the standard and soon everything was all messed up with so many different ways of doing this simple communication.
  21. Allen Ross

    serial controls standard?

    "RS232 the most non-standard standard in the world" One of my ECE professors
  22. Allen Ross

    New Rythmik Audio Driver

    FS a bit high
  23. Allen Ross

    Another DIY rack

    I am going to polish up a stainless steel keg (gonna be a nice lamp when done) and i am just getting ideas on the process how to tackle it.
  24. Allen Ross

    My Sonic Impact Project

    nice job of implementing it all in that small box. before hooking it up to speakers, test it using a multimeter, see what the DC offset is at the output terminals, shouldn't be prob more then 100mv. But if you just took the circuit from one box and put it in another you should be fine, seeing...
  25. Allen Ross

    Another DIY rack

    how did you polish the aluminum? just with a buffer and a polishing compound?
  26. Allen Ross

    Atlas 15's almost gone!

    and i just got paid today, how much is he charging for shipping to you?
  27. Allen Ross

    Budget kits

    i'd look at the PE MTM kit that uses those dayton 6.5 drivers, and dayton tweet, cheap and very prominent in the low end for the price.
  28. Allen Ross

    Question about cone excursion.

    sounds like a muddy hum that isn't anywhere need the sound it should be reproducing. run a sin sweep, if you find one that does it slow enough you can hear it for a short second.
  29. Allen Ross

    Question about cone excursion.

    Ah i see you post on two sites, the answers on DIYAudio pretty much cover it up, The resistance of the air moving in and out of the port (it can't do it as fast as the driver) tames the port movement, but anything below the tuning freq and excursion goes sky high.
  30. Allen Ross

    News on Adire product changes.

    Those are horrible sensitivities, I am so glad I have an "old school" tempest. looks like time will tell what the "Street" prices will be.
Top