Search results

  1. Bstloukal1

    Kit / DIY main speakers

    Just through out the active thing earlier as maybe just a food for thought. Don't really have an intention of going that route just wanted to pick some brains a little. The avr has all that and a lot of calibration adjustments in it. All the frequency adjustments gain adjustments etc. maybe I...
  2. Bstloukal1

    Kit / DIY main speakers

    Good piece of info on the calibration. That's what I have thought but that brings up a different issue as I may be limited on what I can do with my receiver as it is a bit older I know I'm due for an upgrade but that is a little lower on my audio list. Its a sony str-k502p. Maybe it shouldn't...
  3. Bstloukal1

    Kit / DIY main speakers

    Yeah it has been fun! Wasn't planning it that way when I decided to take on the first project but when the bug hits you just want something more or something different. Heck I'm in the process of modeling up another sub project and deciding on a driver at the current time again. I guess it's a...
  4. Bstloukal1

    Kit / DIY main speakers

    Looking to upgrade my current front main speakers. Over the past few months I've built a few DIY subs and all completely overpower my current mains all be it not a hard thing to do as they are paradigm mini monitors. So I am looking at doing a kit or DIY front stage that will supply me with...
  5. Bstloukal1

    Dual 12" sub dual PR flat response curve

    is this the item. http://www.parts-express.com/pe/showdetl.cfm?partnumber=390-806 thanks
  6. Bstloukal1

    Dual 12" sub dual PR flat response curve

    Nice on the stryke PR's. Here is what i am looking at doing i am planning on using a tone generator to make the tone I want to tune the system to.. Let's say 18Hz. I'll play the 18Hz and then add weight until the PR reaches it's peak excursion? Can i use an impedance meter to verify this? Or...
  7. Bstloukal1

    Dual 12" sub dual PR flat response curve

    Not working with PR's before am I looking for something specific. Am I looking for when Xmax is reached when a certain weight is added or am I just looking for what I think is best and then do some measurements?
  8. Bstloukal1

    Dual 12" sub dual PR flat response curve

    the PR's are adjustable they are the VMP 12's.
  9. Bstloukal1

    Dual 12" sub dual PR flat response curve

    Yeah. That's what I was looking at doing. I am planning on doing a 5 cubic as that seems to model up the best. I will make adjustment after its done and I get some readings if needed. I'll keep posted as I plan on documenting this build as it should be an interesting one for me.
  10. Bstloukal1

    Dual 12" sub dual PR flat response curve

    ok played around a little more. The PR side says that is tuned to 11hz were the box is at 22.3hz the graph is looking better but what suggestions would we have to lower the freq tuning and keep a good curve After some playing around this is about the best i have come up with.
  11. Bstloukal1

    Dual 12" sub dual PR flat response curve

    as you can see a flat resonse from 20hz. ideas?
  12. Bstloukal1

    Dual 12" sub dual PR flat response curve

    Working on designing another enclosure which will consist of dual 12" subs and dual PR's. after a lot of modeling I'm showing a really flat response from around 20hz to 32hz. Not having really worked with having to fix a response like this what suggestion would you have the response is low about...
  13. Bstloukal1

    Behringer 1000 dsp hookup/mod question

    what recommendations do we have for binding posts on the enclosure itself.
  14. Bstloukal1

    Behringer 1000 dsp hookup/mod question

    I am going to be switching to a behringer inuke 1000dsp to power my new sub project. Question is on hookup. My current receiver has a rca sub output only. My sub has rca input only. The behringer does not have this type hookup. Suggestions on hookups cables. Also i believe there is a fan mod for...
  15. Bstloukal1

    RE Audio sub DIY HT anyone?

    What is see interesting is that the RE and Fi subs the ones that workd actually modeled good for me were the lowest cost models from each company. They both modeled similar to the TC epics. When I modeled the high price higher power subs from each company the modeling with my criteria and...
  16. Bstloukal1

    RE Audio sub DIY HT anyone?

    Ok I've modeled the REsxx and Sex 12" models. Short skinny of it is at 4.5 cubic foot the sex version with 500w it does not preform close to the TC epic 12. Between the 20-30hz range it is about -5db less than the epic 12. I have to pump it with 900w where it hits its Xmax and am still -3db...
  17. Bstloukal1

    RE Audio sub DIY HT anyone?

    Saw these while doing a search. The RE Audio sxx and sex models. Does any know about the quality of these subs or has anyone worked with them? I was thinking a out picking up the 12's or 15's to play around with for an HT sub. Let me know your thoughts guys. Specs look good but have t seen...
  18. Bstloukal1

    Dayton MKIII 15 ported build Ideas and answers?

    Ok guys when you get some time can you guys model up and epic 12 and a JL 13w6. I have run my models in. 4.5 cubic foot box tuned to 20hz. High pass filter tuned at 18hz. Have ported with 3 x 3" diameter ports. Issue port length get long do I need to change it up? Don't have a problem doing...
  19. Bstloukal1

    Dayton MKIII 15 ported build Ideas and answers?

    Since the JL suggestion was thrown out earlier I modeled up the 13w6 13w7 and epic 12 for a comparison for myself. What I saw was interesting. The epic 12 and the 13w6 in ported enclosures preform almost identical up to 600w of power. The epic does have to work harder as it will hit it's Xmax...
  20. Bstloukal1

    Dayton MKIII 15 ported build Ideas and answers?

    Anyone know anybody selling an TC epic 12 driver?
  21. Bstloukal1

    Dayton MKIII 15 ported build Ideas and answers?

    Yeah it is the radio shack analog model same as you describe above. Any help you can give on that would be great! I'll take a look at the links and see what's happening with the enclosures. Thanks again
  22. Bstloukal1

    Dayton MKIII 15 ported build Ideas and answers?

    Ok I've been modeling up a bunch of different subs for my project and after weeks of this I think I have come to a conclusion. It looks like I'm going to go with the TC epic 12. Has anyone here worked with one. It looks line I'm going ported with a little over 2.5 cubic foot. Let me know what be...
  23. Bstloukal1

    Dayton MKIII 15 ported build Ideas and answers?

    Added the filter to the models and they look much better. What else should I be looking for in the winisd graph capability. The only thing at this point I understand to look for is cone excursion and spl graphing. What else here would be important and why. Another note I pulled out my radio...
  24. Bstloukal1

    Dayton MKIII 15 ported build Ideas and answers?

    at 100w with the 15's im hitting 107db. 100w in the 12 i hit 107 sealed and 103 sealed
  25. Bstloukal1

    Dayton MKIII 15 ported build Ideas and answers?

    this is the info here let me know if anything more is needed or if this is even accurate.
Top