Recent content by MikeCTM

i figured a little more out. what they call 2 x 6 i consider 2 x 3. also, what they call 2 x 4 i consider to be 2 x 2. i downloaded the owners manual and studied it closely. i don't get it. they're '2 x 6' set-up is a stereo 3-way set-up. that's it. left high, left mid, left low and right high...

hi can the dbx driverack pa do a stereo 2-way (2 x 2) crossover configuration? the website doesn't list this configuration. it starts with 2 x 3 and so on. i emailed also but they can take awhile. last email i don't think i ever heard back. thnks

hi i use the dbx 234 as my crossover currently. i'd say the sound quality is excellent. that's practically all that matters to me. real interestingly also, i first used my audio control DXS digital/elec crossover to do the job. i had to go to radio shack first ofcourse i get the proper $15 power...

i think i will do roundovers and i'm thinking 3/4", which is the largest option i have. doesn't internal bracing bring up the freq's and then they dissapate through rounded-over edges and acoustic foam and poly fil? am i assuming correctly the more extensive the bracing the greater results in...

what is the best size roundover to do on some ported floor-standing mtm cabinets? this is for the outside. in addition to the front baffle's four edges, is it beneficial to round over the eight other sharp external edges? thanks in advance

well with isobaric, and more importantly sealed alignment you're not gonna go waaay down deep too quick large box better than small box is my thinking

yeah i hear ya 1.4 x 5 is the same area i think. this makes me want to think about not doing a slot port after all. i'm already losing tuning adjusting with a permenant slot port.

hello everyone i'm thinking about doing a slot port instead of a port tube for the adire kit281. would this work just as well as the port tube? i'm thinking a 1" tall 7" wide and 7.5" deep slot port would be the same volume as the 3" dia 7.5" long tube thanks for the help