Recent content by kurtZoom

I got the PF60 before the price jump and couldn't be happier. No UPS capability, no super noticible PQ or Audio change...it is more for protection and convenience. It has a lot of set up options with outlet switching and delays. Just a nice piece of equipment for the price...and if it saves my...

At first I was wondering if the supplier didn't send me the wrong pins...because I bought a bunch of the L-5CFB/RCAP-C5F stuff as well. I have not had a problem with the those. I double checked the pins and they are to small to fit on the L-5CFB cable so I doubt they are in correct. KurtBJC -...

That makes two of us. Thanks guys.

thanks Alfonso...I was wondering...I was under the impression that the RCA ends were also "75 ohm"...shouldn't I get a 75 ohm reading on those ends as well? or is it just the F type?

I'm following the http://www.bus.ucf.edu/cwhite/theater/DIYCable.htm recipe for buidling cables. I've purchased the exact tools listed on the site including the Canare die and Parts Express crimp frame # 360-680 . I followed the suggestion at the bottom of the DIY page to "tighten up" the crimp...

thanks Bob... I'm a tad confused...wouldn't the sub amps act the same as the outlaw amp? There are two individual amps that drive the subs. They are separate from the sub speakers. I mihgt be mis-understanding. Is it that the outlaw amp is reproducing almost full range vs. the sub amp only...

I have a Belkin PF60 power conditioner. The PF60 has one bank with two outlets specifically designed for high draw amps. I have a Outlaw Audio 7125 that will go to one of the outlets. I also have two NHT 250watt sub amps that I also want to plug in. Should I "split" the other amp outlet for...

thanks guys...I'm ready to start

I've searched this forum and came up empty on what I'm looking for. I purchased a used set of tools and all my materials to follow the recipe provided in http://www.bus.ucf.edu/cwhite/theater/DIYCable.htm to make DIY cables. My Outlaw 990/7125, and Oppo 971 will be delivered today...so...

I was looking at an old buddy of mine's wife's website and came across this blog and found it entertaining....thought you all would enjoy it as well. A clearly non-enthusiasts view point. Here is an exerpt... Back to the Future or My Quest for HDTV I had been looking with hungry eyes at...

Gregg Which model are you referring? Is this the HLRxxx series?

check out http://www.decorp.com/dewire.htm I do not have personal experience with this....just ran across it at some point and it seemed interesting. I'm sure there are other alternatives but this might fit your bill. On the website anyway the shortest length they show is 25'...since you...

Check out the AW650s from http://www.proficientaudio.com/ These are much less than your budget but sound awesome.

for several years I ran a set up..not exactly the same but may give some insight. I had a 1995 Denon AVR-2500 (?) that I used the A speakers as the main speakers and the B speakers were my deck speakers. I used the "Zone 2" out to a mid 80s yamaha 2x80w receiver. That receiver then went to one...

sorry Patrick I was gone most of the weekend. here is the avs link on the Phillips 42pf7220 http://www.avsforum.com/avs-vb/showt...&page=29&pp=30 for the wall mount...I purchased a Peerless unit from Costco...$99 http://www.costco.com/Browse/Product...rodid=11070514 If the link doesn't...