• Announcing New Ownership at Home Theater Forum. Learn More

Recent content by Jeff Rosz

  1. Jeff Rosz

    Who wants 60+ L of displacement in 1 cone?

    so can i ditch my single shot tater cannon and load this puppy up with a whole bag of taters shotgun style? :D
  2. Jeff Rosz

    enclosure help

    and who made this 10"sub? whats the model? looky looky
  3. Jeff Rosz

    which DIY sub would be the best bet?

    drexel if you are gonna go with a shiva go to adire's website and download lspcad. then go here and read. then go and play with lspcad.
  4. Jeff Rosz

    Which one first.

    larry, re: the cc speaker...ok that wasnt clear in your original post. thats fine, use it until you upgrade. when you get a new receiver AND IF you use the sharp as the sub amp (i wouldnt, 40 watts into 6 ohms at 10%, yuk)... run an rca cable from the new receiver's lfe-out rca jack to the...
  5. Jeff Rosz

    Just finished my Tumult / 18PR enclosure :) *pics*

    lol, that "sub" :rolleyes:is actually a possum trap, yes a possum trap, that was stolen from behind a VW bus that got smashed by a dc-10 jet engine that fell on it while it was up on blocks in my front yard. and i want it back, dem possums is startin to getting thick round here.
  6. Jeff Rosz

    Which one first.

    hi larry, 6. build sub, save a lil, watch some movies, buy plate amp , save a lil, watch some movies, buy receiver, save a lil, watch some movies, build center, save a lil, watch some more movies, build speaks, pat yourself on the back for having the patience to do it, save a lil, buy more...
  7. Jeff Rosz

    Just finished my Tumult / 18PR enclosure :) *pics*

    now THAT is what this stuff is all about. great looking sub there AG.
  8. Jeff Rosz

    Ah, joys of joys. My Tempest sub is DOA.

    i wouldnt sweat it one bit. i just got off the phone with adire about one of my tumults that was damaged on arrival. a nice fellow there took my call and info...AND he was on top of a scaffold. he must have been writing the info on his hand or something. thats customer service. so is this...
  9. Jeff Rosz

    Where to buy cable for Linksys PCMIA ethernet?

    no, thats the dongle, not the card. here is a link to the card. the nerds have the pics all screwed up. as you can see they show a pci card instead of the pc card. so dont go by the pics. the card sells for $31, the dongle for $12.58.
  10. Jeff Rosz

    Where to buy cable for Linksys PCMIA ethernet?

    after just a quick search mind you, i found this... i have 2 of those cards myself and this is the exact cable i have. the picture at the link below shows the card, but the add is for the cable. hope that helps. COUPLER FOR PCMPC100 PCMPC200
  11. Jeff Rosz

    Received My Tumults, but need help

    try something like this. or use a drill bit or rotary rasp of large enough size to take the head of the screw off the shaft. a chisel may work too. the metal of the wood screws used is kinda brittle and with one good hit you could break the head off. a dremel tool with a grinder bit might...
  12. Jeff Rosz

    Intermediate clamping advice needed (Hank, Brian, Kyle?)

    you should check that your table saw blade is 90 deg to your table. there are a couple of things you can do to solve the problems you have now... you can cut the panels oversize and trim to final size with a trim bit on a router. you can inset small blocks glued/screwed the thickness of the...
  13. Jeff Rosz

    Beginner Pool Player Needs Advice

    i cant find the combos you talk about. the others look ok. but buying a cue unseen and unheld (off the net) is tough. UNLESS you go for a good name brand like viking or mcdermott or KNOW what you want. i wouldnt have any problem buying a cue off the net sight-unseen from these two makers. they...
  14. Jeff Rosz

    Beginner Pool Player Needs Advice

    brett, do a google search on "billiards". you'll find tons of cues to fit your budget. go for a middle of the road weight for now 19 or 20, unless you already have a preference. look for a nice thread grip, screw in replacement tips if you can, and get a deal with a free case. for accessories...
  15. Jeff Rosz

    Wal-Mart's meat dept?

    "it looks like there is a thick/thin layer of shiny stuff surrounding the meat?" yes, but um, i didnt wanna say it like that. :D