Recent content by dfondry

Yes, just checked and it is current. I will continue to research. This is a more of a convenience issue as opposed to black and white functionality. Thank you for helping me get the latter fixed.

Thanks for the reply Sam! Going down your checklist I was able to get it working...sort of. Verified bi amp is off, but my rear surrounds were not on. Turned them back on and 7.1 has returned. Duh. However this worked when zone two was set to off. Turning zone two back "on" (in set up)...

Hi All, I have found as much info as I can find on this and it seems as if possible to use a DSP like PLIIx to achieve 7.1 sound including rears while zone 2 speakers are connected albeit not in use and with zone two turned off. Anyone having problems with this? Prior to connecting my zone...

An update - the Vanco works like a charm. 1080p from the wall back to the laundry room. Thanks for all the help.

Thanks to everyone for your help today. We will be dismounting the tv tomorrow to clean the hdmi head as one last hope. After that I will be making the move to the Vanco. Will update hopefully with good news. Cheers

Thank you all for the help and advice. I will definitely check the cable next time. I spoke to my electrician/AV guy and perhaps all is not lost. He buried a cat 5 cable in the wall for just such a possibility. Will need a balun (sp?) connector but may not have to rip apart the wall just...

Thanks for the welcome and the responses. Just tried reconnecting the hdmi cable to no avail. Back to the beginning. With everything that has been ruled out so far am I back to a bad cable? Or are there otentially some setting issues with the avr to the tv. I feel like I've been stung by...

Thanks for the quick response! Just tried this, and the result was similar to the avr connect. Connected blu ray directly to the 60 ft HDMI, turned blu ray on and the tv turned on to proper input but displays "no signal" message. Is it possible the HDMI is not fully connected to back of tv...

Hi all, I had a home reno project go a little awry and am hoping the experts here can get me back on track.Here is the setup I had working fine before the reno (all connected through HDMI):Onkyo NR-709TV - Samsung PN64D550C1FXZABlu Ray - Panny DMP - BDT220We put in new flooring and since we were...