Recent content by BrianJ>Y

Pics sent Dave.

I've sent you pictures Thanks, Brian

Hi all, I have a pair of M22's in black, great condition, just some minor scratches that can only be seen if light is shined on them. Less than 100 hours, barely played, never abused or even turned up to remotely loud levels, smoke free environment. They are about a year and a half old...

Maybe I've only witnessed horribly set up tv's, but all of the HD rptv's I've seen playing dvds are just plain ugly. Native resolution of an hdtv is 1080 lines, so isn't playing a dvd on an hdtv like playing VHS on a nonhd tv? It sure looks like it...

Yea I would use all mdf too...problem is I had my friend cut the plywood already, since it's all he had lying around. I originally planned on using the ply to attach onto my current box. But now I'm thinking of building a completely new box and just supplying the mdf to him for the braces, so he...

Thanks for the response Anthony. I do want to build a new box and do it right. I was mainly concerned about the strength of the 5 layer ply. Do you think I should brace with mdf or the same ply?

Is regular 3/4" plywood (5 layers) ok for a sub enclosure? I plan on bracing with either the same plywood or mdf... I have an all mdf box already built for my av12, it's 3.5 cu-ft. Problem is it vibrates and rattles once the volume reaches moderate levels. When you put your hands on the side...

I'm trying to increase the response of my speakers between the frequencies of 100-800hz. How would I do this with placement? Moving the speakers closer to the side walls, rear wall, or both? Also, if the mid/bass driver's distance from the rear and side wall are equal, how would the sound...

Seth, if you must buy any of the polk surround packages, I wouldn't get anything under the 7600. Any series under that has 3 1/4" drivers that just won't cut it in a big room. Polks are good speakers, but there are a lot of other companies that make great speakers as well for around the same...

You can buy it at walmart for a couple bucks per 12-20 ounces. It's polyester fiberfill. If your titans sound fine to you then I wouldn't add any more stuffing. If they sound a bit hollow to you, then adding the stuffing will solve that. Sometimes companies screw up and dont add enough or any...

Try using the phase control. Play around with various levels such as 1/4,1/2,3/4, and 180. I get different frequency responses with each of the above settings and have smoothed out many, but not all of my peaks and nulls.

I just attached the braces to the panels using wood screws(drilled from the outside). I previously used only brackets, now I have both. I'm hoping that helps improve the rigidity. I'm going to just add more weight rather than more panels. I'm curious though, if I don't add any additional...

By pounded I mean putting your hands on top of the sub and feeling as if somebody was punching the top from the inside... I'm worried that my enclosure isnt rigid enough, although I built it like everybody else does...atleast I hope I did.

Well I finally finished my ported 3.5cu-ft downfiring av12 sub + Rythmik amp...and it sounds AWESOME. Only thing is when I play it at around -5 to -10 from reference levels in my 3000cu-ft room the sides and mainly the top of the box feel like they're really getting pounded from the inside. I...

I think I'll go with 2 1/2...I wanna go as low as possible for looks. Thanks for the help guys.