Recent content by BenA

  1. BenA

    Which Silver 3D paint for best screen

    Hi: I want to upgrade my theatre room to be able to view 3D as well as 2D movies. My projector is 19 feet from the screen. The projector is 3300 lumens. The seats are 13' & 16' from the screen. Most seats are directly in front of the screen. The furthest seat from the centre of the screen would...
  2. BenA

    Temporary picture loss with big bass sounds

    Thanks Guys I'll try the easiest solution first and check that connections are all solid and that all cables are good. If that fails, I'll look into shielding the speakers, but that means pulling them out of the walls. (BTW...all building codes adhered to) Thanks
  3. BenA

    Temporary picture loss with big bass sounds

    Hi All: Could use some help please. I have an "In Focus" projector, hooked up through a THX receiver. My player is a PS3. I finally have my room set up the way that I want it; 8, in wall speaker (2 rear, 2 side, 2 front, 2 ceiling) plus a sub woofer. Picture is awesome, sound is great. Here's...
  4. BenA

    Please help-PS3 not recognizing 3D capabilities of my Viewsonic Full 3d projector

    Well....thanks! That solved one problem and created another. I assume that I can solve the issue of sound and switching between devices by using an HDMI spitter though. Thanks again (of course, common sense would have helped to).
  5. BenA

    Please help-PS3 not recognizing 3D capabilities of my Viewsonic Full 3d projector

    I'me embarassed to say that I don't know what an AVR is. I have a PS3(with the most recent firmware update), using HDMI cable into a THX reciever; from THX reciever into the projector.
  6. BenA

    Please help-PS3 not recognizing 3D capabilities of my Viewsonic Full 3d projector

    Hi All: Looking for some help that I can't seem to find on line, or in manuals. I have recently purchased a Viewsoninc PJD7820HD Full 3D projector. My previous projector was "3D ready" BenQ (MP626), so I needed a 3D converter box. I was under the impression that with a Full 3D projector...
  7. BenA

    3d configuration issues with PS# & BenQ MP626

    So, if I were to buy software that supports 3d (Ultra Like Power DVD 14), then I could feed my PC through the BenQ projector? My PC does have and HDMI output port. Thanks Ben
  8. BenA

    3d configuration issues with PS# & BenQ MP626

    I am sorry Schan1269, but I do not understand what you mean by PC 3D is not BD 3D". Yes I really am that slow.
  9. BenA

    3d configuration issues with PS# & BenQ MP626

    Hi: Newbie alert...sorry. Here's the problem. I have a BenQ MP626 DLP projector, which is 3d compatible. :3dglasses: I have a Sony PS3 with the latest firmware update (4.55).....also 3d compatible. I have high speed HDMI cables, but I am still unable to get either my projector or the play...
  10. BenA

    Theatre room & Karaoke with in-wall speakers

    Sorry; My understanding was that feedback was due to the speaker output, feeding back into the microphone, and looping. My microphones are both quite good(they are Sure SM58's). These are professional mics, and I still get feedback, if I get too close to, or if someone points the mic in the...
  11. BenA

    Theatre room & Karaoke with in-wall speakers

    O.K., so I've just bought a new home and want to put a home theatre and karaoke room in the basement. Since the room is not yet finished (no drywall), I would like to install in-wall speakers. No problem, if this where just a theatre room; but am I going to have all sorts of feedback problems if...
  12. BenA

    3D Please help clarify "3D' glasses

    Hello All: I know that there are your standard "old school" 3d glasses (blue & red lenses) as well as variations on a theme for colours, and that there are "Real D" and now "Active 3D" (the ones with the batteries). And I know about the refresh rate and all of the other technical stuff...
  13. BenA

    Not getting any sound from my receiver

    It's all good. It was that PCM thing.....Thanks
  14. BenA

    Not getting any sound from my receiver

    Hi; I just got a new home theatre system (the old one died...but I knew how to use it). So, I've got a PS3 (For the Blu Rae player), a Sony STR-DG820 receiver and a BenQ MP626 projector. Everything seams to be conected ok but I can't seam to get any sound. I have pluged the PS3 directly into...