enerplex1
Auditioning
- Joined
- Mar 3, 2013
- Messages
- 6
- Real Name
- mike
I have A Epron ub8700 i bought used on ebay. It has two problems. One is that there is a green tint that i fixed by lowering green on the color setting ( this green tint is probably because one of the LCD is dying or burnt. The other problem that sometimes when i click the power button to turn it on the projector starts and it displays the Logo EPSON and then shuts off the bulb and it does this 3 times Sometimes 2 but eventual the projector turns on. Has someone else had this problem where you have to turn on the projector two or 3 times before it starts???? also it does not have an epson brand light bulb.
Is there an internal button on the projector that i can click to reset everything to factor settings??
Other thing worth noting is that when my computer detect that the projector has been turned on if flicker the main monitor. When i click to power button and the pc flicker right away the projector starts up right away if the PC monitor does not flicker right away then the projector does not start .
Is there an internal button on the projector that i can click to reset everything to factor settings??
Other thing worth noting is that when my computer detect that the projector has been turned on if flicker the main monitor. When i click to power button and the pc flicker right away the projector starts up right away if the PC monitor does not flicker right away then the projector does not start .