-

Jump to content



Photo
- - - - -

New Media Room With Epson 5020 Tips


  • Please log in to reply
2 replies to this topic

#1 of 3 djtech2k

djtech2k

    Stunt Coordinator

  • 54 posts
  • Join Date: Jan 12 2013

Posted April 12 2013 - 11:04 AM

I recently had my media room built, which includes an Epson 5020.  Now I am trying to take baby-steps to learn about all the equipment I have.  I want to walk before I run, so I am just trying to start with basic functionalty settings/features.  So I am looking for any tips that you guys might have for someone new to to projectors, etc. 

 

For example, I notice when some light is on, the picture does get washed away a bit, especially if the movie is dark, like the Avengers.  I would like to improve the dark performance.  I have heard that there are some settings, like "eco" based stuff that make the picture more dim or something like that.  I looked in the menu but didnt see what I expected.  Any suggestions on improving this performance or finding how mine is setup now?  All I saw was like "power mode" or something, which was set to "eco".

 

Any tips on the projector or anything else, please let me know.

 

Thanks!

 

Here is my list of equipment:

 

Projector: Epson 5020

Screen: Carada 100" white

Receiver: Pioneer Elite VSX-53

Speakers: MartinLogan 5.1

BluRay: Oppo BD-103

Remote: Control4 System



#2 of 3 Type A

Type A

    Supporting Actor

  • 794 posts
  • Join Date: Apr 07 2007
  • Real Name:Ty
  • LocationPortland Oregon

Posted April 12 2013 - 06:16 PM

In order to walk you will first need to read your owners manual.  In it you will find info on "eco" mode and other useful information about your new projector.

 

Good light control is very important in front projection and theres no way around that.   You can throw a brighter image in a bright room, and that will combat some of your wash out issues,  but it will also turn your blacks into a grey color.  There are projection screens like the "Black Diamond" but be prepared to fork over big money for the privilege of ownership. See a demo video here:

 

 

Painting your walls a dark color will give you better contrast and black level performance.  However even with dark walls the same rule will still apply and there is still no substitute for turning off the light.


JVC DLA-RS60U3D & DaLite High Power 106"
Paradigm Studio V.5 20 (5) & ADP590 (2)  
Hsu VTF-2 MK3 (2) & MBM-12 MK2 (2)

Yamaha RX-A3010 & Emotiva XPA5
Oppo BDP93 & Darbee DVP 5000

*My Home Theater Photo Journal*

#3 of 3 Type A

Type A

    Supporting Actor

  • 794 posts
  • Join Date: Apr 07 2007
  • Real Name:Ty
  • LocationPortland Oregon

Posted April 13 2013 - 04:59 AM

Few additions concerning getting the most out of your lamp:

Lamp life is affected by power cycles, ie turning the projector on and off, so go ahead and use it for a couple hours when you turn it on.

Every time you hit that Off button it will likely need a minute or two to cool so avoid sudden power losses or sudden unplugs during use.

I got 3 year lamp (up to two lamps) insurance for $150 when I first purchased the projector. If its an option for you, and its a substantial savings over no insurance lamp replacement and you tend to put substantial hours on your lamp (you are going to...arent you???), then obviously spending additional on insurance is money well spent.

To maintain constant brightness over the life of the lamp I will; Open manual iris (if so equipped) in small steps as I notice dimming, operate in eco until I notice dimming at full open aperture and then finally increase lamp to high (or normal as the case may be) and adjust manual iris ascending again. :)
JVC DLA-RS60U3D & DaLite High Power 106"
Paradigm Studio V.5 20 (5) & ADP590 (2)  
Hsu VTF-2 MK3 (2) & MBM-12 MK2 (2)

Yamaha RX-A3010 & Emotiva XPA5
Oppo BDP93 & Darbee DVP 5000

*My Home Theater Photo Journal*




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users