- View New Content
- Blu-ray, DVD, Streaming Video and Digital Downloads
- Home Theater Hardware
- Theaters, Remotes and Accessories
- Equipment Reviews
- DVD & Blu-ray Reviews
- Other Diversions
- Bargains and Deals
- Feedback and Testing
- Latest Blu-ray Deals
- Blu-ray Pre-Orders
- Shop Amazon & Support HTF
- Theater Photos
DVD & Blu-ray Reviews
- Equipment Reviews
- Shop Amazon
- Support HTF
Onkyo M282 vs M5010
8 replies to this topic
Posted March 01 2013 - 09:46 AM
i'm looking to purchase one of these onkyo amplifiers but which is better? i know the 5010 is the newer model but it has less wattage. Is that important? i'm trying to boost my magna planar electro static speakers. Thanks!
Posted March 01 2013 - 10:20 AM
Who cares the 5010 is newer? If you want a great amp, buy an old Hafler.
Posted March 02 2013 - 02:10 AM
thanks so much for the reply - unfortunately, i'm on a budget and the Hafler amp is above my range currently :/ i wasnt trying to buy it b/c it was new, it just had different features listed and since i'm no expert... i wasnt sure what was going to make a big difference, and what wasnt... anything else someone would suggest to look for in the $200-$350 range?
Posted March 02 2013 - 04:42 AM
How much power do you need? The reason I mention Hafler(there were more than one...and most below $350) is you can re-sell those for what you paid. Do you have a receiver now with pre-outs? Or...??? Many people find "more power" doesn't solve the underlying issue. I used to run a pair of SMGa from a Denon DRA-335. The 335 is hardly a powerhouse...and played the SMGa plenty loud. Also(they used to mention on the website, maybe they still do???) In their headquarters, they run a pair off a 10w tube amp. 10w tube makes most of the Maggies sing.
Posted March 02 2013 - 04:53 AM
to be honest, im not sure what EXACTLy i need, i just know that my Onkyo TX-NR1009 THX receiver does a good job at powering those speakers, but not a GREAT job. I really want to crank them up loud w/out pushing the receiver to 80db for decent sound, but no way their peak. So yes, my receiver does have pre-outs and im open to a tube amp if thats what is best.. but i'm not really sure.. lol i have no hifi friends i can ask so i'm turning to the best place i know.... forums
Posted March 02 2013 - 06:29 AM
I have the 1008. I run a 7.1 plus height. It never lacks for power...but.... Most of the time "icky sounding planar" is not helped by "more power". Is this "just a pair" or is this an entire theater? IF "just a pair", I would purchase a tube...of some form...here is an example. Ugly? Sure. But it works...and will make your Maggies sing like Shirley Bassey http://www.ebay.com/...=item3ccf0243b0
Posted March 02 2013 - 06:32 AM
By the way, I've used a "speaker switch" in reverse order before... Connect your Maggie to a switch then the 1009 and "That HK" to the speaker switch. But, only turn on one amplifier at a time(or smoke will happen...) Then you can have the 1009 run the theater...and when you listen to 2 channel and want more glory...there you go.
Posted March 04 2013 - 01:59 PM
i'm looking to purchase one of these onkyo amplifiers but which is better? i know the 5010 is the newer model but it has less wattage. Is that important? i'm trying to boost my magna planar electro static speakers. Thanks!Neither amp. Those models are no better than inexpensive receivers. The M282 has no published 6 ohm or 4 ohm spec, the M5010 actually puts out less power into 4 ohms, power measurements made into a less demanding 1kHz, versus 20Hz - 20KHz. I have no problem with Onkyo, I had their TX-DS696 AVR as the centerpiece of my HT system for several years. IMO, your money is better spent on an amp like the Emotiva UPA-200. Its a much better value. http://shop.emotiva....products/upa200
Main system: Denon DP-59L, AudioTechnica AT33EV, Marantz SA-11S2, Classé CP-50, Classé CA-300, PSB Stratus Gold is, DIY Balanced Power Conditioner, Acoustic Zen Cables.
HT System: Toshiba DVD player, Marantz SR-19, Phase Linear 400 Series 2, Axiom mains, Dayton 12" subs (2)
Party System: laptop, AQ Dragonfly USB DAC, Technics SUA6, Acurus A250, Radio Shack EQ, Pioneer SR9 reverb amp, Cerwin-Vega DX9s, Dayton horns w/ HF/MF drivers.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users