-

Jump to content



Photo
- - - - -

Experimenting


  • You cannot start a new topic
  • Please log in to reply
4 replies to this topic

#1 of 5 OFFLINE   Shorty Boy76

Shorty Boy76

    Agent

  • 31 posts
  • Join Date: Mar 08 2012

Posted October 19 2012 - 04:19 AM

Anyone ever hook up 2 sub plate amps to a dvc subwoofer with success? Thinking about condensing 2 sub enclosures and getting a dvc sub. The amps are Bash 300s.....

#2 of 5 OFFLINE   schan1269

schan1269

    HTF Expert

  • 13,929 posts
  • Join Date: Jul 04 2012
  • Real Name:Sam
  • LocationChicago-ish/NW Indiana

Posted October 19 2012 - 04:25 AM

More info please... Why would BASH amp be any different than how this would be done otherwise? The only thing that "might" pose a problem is if two amps cause too much heat inside the box...

#3 of 5 OFFLINE   Shorty Boy76

Shorty Boy76

    Agent

  • 31 posts
  • Join Date: Mar 08 2012

Posted October 19 2012 - 05:52 AM

No prob at all. Just wondering if anyone's done it, and if they have what woofer brand did they use?, and how were the enclosures built to house the 2 plate amps in/on the enclosure.

#4 of 5 OFFLINE   Robert_J

Robert_J

    Lead Actor

  • 8,158 posts
  • Join Date: Aug 22 2000
  • Real Name:Robert
  • LocationMississippi

Posted October 19 2012 - 07:29 AM

What driver? Since the BASH amps create their rated power into 4 ohms, then you will need to find a dual 4 ohm driver that can handle 600w or a dual 8 ohm driver that can handle about 400w. You need to also make sure the gain of both amps are set identical. How would you do that? Digital multi-meter and test tones. You will need to set the phase of both to 0 and hope the controls are calibrated the same.

#5 of 5 OFFLINE   Shorty Boy76

Shorty Boy76

    Agent

  • 31 posts
  • Join Date: Mar 08 2012

Posted November 03 2012 - 07:46 AM

12" Alpine Type R,




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users