Jump to content



Sign up for a free account to remove the pop-up ads

Signing up for an account is fast and free. As a member you can join in the conversation, enter contests and remove the pop-up ads that guests get. Click here to create your free account.

Photo
- - - - -

How many of you invested in repairing RPTVS?


  • You cannot start a new topic
  • Please log in to reply
9 replies to this topic

#1 of 10 OFFLINE   Jerome Grate

Jerome Grate

    Screenwriter



  • 2,937 posts
  • Join Date: May 23 1999

Posted April 10 2012 - 06:08 AM

It's been a while since I started a post, anyway a week ago I decided to invest some money into repairing my old Sony KP51WS520 RPTV. It cost me $200.00 which was only10% of what I would have spent to replace the unit with the same picture quality. The power board went bad as the indicator light flashed 9 times without a click or the t.v. coming on. I shopped around and I tell you the only picture I was really impressed with came from the plasma t.v.s which really had pretty good blacks that make the colors pop. My Sony is doing that very same thing. I'm glad I spent the money to have it fixed, and I can deal with the occasional visitor asking me why do I still have that monster t.v. How many of you guys and gals did the same? Please humor me and let me know with your comments.
Listen Up People.., Rack Em and Pack Em.., We're Phantoms in 15.

#2 of 10 OFFLINE   Gregg Loewen

Gregg Loewen

    Video Standards Instructor, THX Ltd.



  • 6,364 posts
  • Join Date: Nov 09 1999
  • Real Name:Gregg Loewen
  • LocationNew England

Posted April 10 2012 - 03:38 PM

Hi Jerome. you were very lucky to only spend $200. Most techs will charge at least just to come to you. I new 50 inch plasma that would out perform your old crt would cost about $800-1000 easily. Keep your fingers crossed and hope you get some good additional mileage!! Gregg

The Sonodome - circa 2001
The Newest Sonotube - circa 2001
Gregg's DVDs updated...sometimes
Lion Audio Video Consultants usually current


#3 of 10 OFFLINE   Jerome Grate

Jerome Grate

    Screenwriter



  • 2,937 posts
  • Join Date: May 23 1999

Posted April 10 2012 - 03:58 PM

I'm hoping to get a good 3 to 4 years out of it.
Listen Up People.., Rack Em and Pack Em.., We're Phantoms in 15.

#4 of 10 OFFLINE   dmiller68

dmiller68

    Supporting Actor



  • 667 posts
  • Join Date: Sep 29 2009

Posted April 10 2012 - 04:00 PM

I have only done it when covered under warranty. The last repair on the Mits I had would have cost me $1200 lucky for me free. Then I sold it shortly afterward.
Equipment: Panasonic TC-P65VT25, Panasonic DMP-BDT100, Pioneer Elite SC-37, TiVo Premiere XL, Limited Edition MW3 XBOX 360s with Kinect, Apple TV
Speakers: Definitive Technology Mythos XTR60 (3), Definitive Technology Mythos XTR20BP (4), Definitive Technology SuperCube II


#5 of 10 OFFLINE   Jerome Grate

Jerome Grate

    Screenwriter



  • 2,937 posts
  • Join Date: May 23 1999

Posted April 10 2012 - 05:12 PM

You were very lucky to get something like that fixed under warranty, then unload it. What did you replace it with?
Listen Up People.., Rack Em and Pack Em.., We're Phantoms in 15.

#6 of 10 OFFLINE   dmiller68

dmiller68

    Supporting Actor



  • 667 posts
  • Join Date: Sep 29 2009

Posted April 10 2012 - 05:58 PM

Panasonic TC-P65VT25   Well it is a long story my original Mits died three times with a board failure. On the third time they gave my the full purchase price toward a new TV. Which I bought a new Mits however 2 years later it did the same thing so I unloaded it as quickly as I could. I was planning on doing a major upgrade of my theater so it was like all the stars aligned to allow me to pull the trigger. 
Equipment: Panasonic TC-P65VT25, Panasonic DMP-BDT100, Pioneer Elite SC-37, TiVo Premiere XL, Limited Edition MW3 XBOX 360s with Kinect, Apple TV
Speakers: Definitive Technology Mythos XTR60 (3), Definitive Technology Mythos XTR20BP (4), Definitive Technology SuperCube II


#7 of 10 OFFLINE   Gregg Loewen

Gregg Loewen

    Video Standards Instructor, THX Ltd.



  • 6,364 posts
  • Join Date: Nov 09 1999
  • Real Name:Gregg Loewen
  • LocationNew England

Posted April 11 2012 - 11:16 AM

Sweet!!

The Sonodome - circa 2001
The Newest Sonotube - circa 2001
Gregg's DVDs updated...sometimes
Lion Audio Video Consultants usually current


#8 of 10 OFFLINE   Al.Anderson

Al.Anderson

    Screenwriter



  • 2,305 posts
  • Join Date: Jul 02 2002
  • Real Name:Al

Posted April 11 2012 - 01:24 PM

I also fixed my RPTV. I have an 8-9 year old 47" Panosonic that lost it's convergence circuit about a year ago. I read that I could fix it for about $10, but I fry devices putting in batteries ... so I paid a little less than $300. Too much I know, but I hate to toss stuff that can be fixed and otherwise works fine. Plus, like the OP, I like the picture of the old analogs. Only problem I have is that it doesn't have HDMI. That's starting to get old now; but I humor myself by saying that when the time does come for the new TV, I get to spend more since I was thrify on the repair!

#9 of 10 OFFLINE   Jerome Grate

Jerome Grate

    Screenwriter



  • 2,937 posts
  • Join Date: May 23 1999

Posted April 12 2012 - 08:19 AM

Al, I can kind of relate to your situation with your RPTV. I say kind of because my Sony has one HDMI input, but the audio receiver has 4 inputs. The one input really is a big help and allows me to be utilize HDMI components. I have the Blu-ray player hooked up via HDMI and when my order of 4 HDMI cables come in from Amazon, I will hook up the HD-DVD player and the HD-DVR cable box to the receiver via HDMI into the t.v. The fact that the t.v. had one HDMI input is the reason why I wanted to invest in getting the t.v. fixed, I won't be able to do 3D, but that really is something that does not peak my interest. I have to admit, like Gregg said, down the road I will be replacing the model with a plasma set, but for now, I am cool.:cool:
Listen Up People.., Rack Em and Pack Em.., We're Phantoms in 15.

#10 of 10 OFFLINE   John Sparks

John Sparks

    Supporting Actor



  • 943 posts
  • Join Date: Sep 12 2001
  • Real Name:John Sparks
  • LocationMenifee, CA

Posted May 03 2012 - 07:44 AM

I bought my Mit 65711 in 2002 and it was ISFed 2x by two of the best in the business. Also had the lens cleaned by one of the best in the business. Last year it wouldn't stay on. Had someone out twice and couldn't be sure what it was. Was it worth it to keep dropping money into it, no, and I bought a new Mit DLP 65738 for $850 on sale still in the box. The down side it's not made anymore, only 73 inchers. Calibrated it from the internet and it shines. Does its QC rival that of the 65711, maybe, but at least the 65738 works. Oh, and i got around the problem of no HDMI inlets on the 65711 by using an HDFury...best thing ever made! Then again, no screen TVs compares to my Epson 9500 UB projector in my HT.
...retired at last...and Ray Harryhausen at my side!!!

 

My HT equipment consists of:

Epson 9500 UB PJ(Avical ISFd); 110" JKP Affinity Screen; Panny BD30 Player; Tosh HDA1 Player; Definitive Speakers(center, towers, rear); Onkyo 608 A/V Receiver; Nevo Q50 Remote; TWC HD Cable Box; Panamax Line Conditioner.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users