Jump to content



Sign up for a free account to remove the pop-up ads

Signing up for an account is fast and free. As a member you can join in the conversation, enter contests and remove the pop-up ads that guests get. Click here to create your free account.

Photo
- - - - -

Panasonic TV going on standby after revceiver power down.


This topic has been archived. This means that you cannot reply to this topic.
1 reply to this topic

#1 of 2 OFFLINE   olfelix

olfelix

    Auditioning



  • 1 posts
  • Join Date: Jan 24 2012

Posted January 24 2012 - 12:37 PM

Greetings all I'm looking for some help with my Panasonic TH-46PZ80O Viera plasma TV. We've recently added an Onkyo TX-NR609 to out home system (replacing a Sony STR-DH800) and we've found that once we power down the receiver, the TV will go off as normal (set to auto-off). Then, as we turn on the receiver the TV will automatically go on stand-by mode. It will click on, but the red indicator light will blink 10 times in sequence and nothing else will happen. At first, we thought our power supply was shot, after reading a few random posts. Trying not to freak out, I unplugged the TV and found that if we remove both the power cord from the outlet and the HDMI cable from the receiver, reattach everything and power on the TV, it would work normally. So far, I've been unable to solve this problem, I've tried toggling the power options on the TV and the receiver (also tried the RIHD options), I've tried disconnecting other inputs from the receiver as well as powering down only the TV etc. yet we're still getting the 10 blinking lights on power-up. We've resorted to leaving the TV on and just powering down the receiver to avoid having to unplug/replug everything. All the other components work just fine. Currently the following inputs are connected to the receiver, all HDMI Panasonic Blu-ray Player Xbox 360 Scientific Atlantic cable box I'm using HDMI 1.4 cables for all inputs (purchased from Monoprice if that helps) The receiver itself is connected to our router and has fully updated firmware. Any assistance would be greatly appreciated. Thank you

#2 of 2 OFFLINE   Gregg Loewen

Gregg Loewen

    Producer



  • 6,333 posts
  • Join Date: Nov 09 1999
  • Real Name:Gregg Loewen
  • LocationNew England

Posted January 26 2012 - 10:34 AM

in the TV menus...there is a Veiro cast (spelling is not correct) setting. This is for HDMI. Turn it off.

The Sonodome - circa 2001
The Newest Sonotube - circa 2001
Gregg's DVDs updated...sometimes
Lion Audio Video Consultants usually current