-

Jump to content



Photo
- - - - -

Test Tone CD burnt. Now what?


This topic has been archived. This means that you cannot reply to this topic.
No replies to this topic

#1 of 1 OFFLINE   wooly

wooly

    Auditioning

  • 7 posts
  • Join Date: Mar 05 2011

Posted March 06 2011 - 01:47 PM

Excuse me if this sounds like I don't know what I'm doing because I don't.


I have the radio shack SPL meter. I am able to adjust each speaker according to the test tones on the amp (Harman Kardon) but now I'm getting into it a little farther but that's where I need some help.


I burn't a test tone CD with all the frequencies from 10hz up to 300hz. along with a pink noise generator. I know that somehow you use this to fine tune your system but I having a hard time understanding it because I'm not sure what I'm doing, What exactly is the purpose of a test tone cd and how does one achieve the end result so that my system is at it's best performance?


Could someone give me some instructions as to what I should be doing in plain, not to tech language or direct me to a web site? This is new to me. I'm from the day when you had On, Off, tone and volume and that was it.


Thanks