-

Jump to content



Photo
- - - - -

speaker wire for surrounds in an apartment


This topic has been archived. This means that you cannot reply to this topic.
3 replies to this topic

#1 of 4 OFFLINE   jeff.m

jeff.m

    Agent

  • 34 posts
  • Join Date: Mar 01 2005

Posted March 16 2005 - 03:07 PM

going behind the walls or under the carpet is not an option for me, so i'm going to have to run it on the ceiling. i've seen some "thin" speaker wire that is self adhesive. does this stuff work? and is the quality good? any recommendations would be great. it's just a plain white ceiling that i'll be running the wire on. thanks.

#2 of 4 OFFLINE   Wayne A. Pflughaupt

Wayne A. Pflughaupt

    Producer

  • 5,910 posts
  • Join Date: Aug 05 1999

Posted March 16 2005 - 03:24 PM

I know a guy who was in your situation when he lived in an apartment. What he did was use white 18-gauge zip-cord and ran it up the wall in the corners, and then across at the ceiling/wall junction to the speakers. It was practically invisible – only an install geek like me, who automatically looks for wiring when he sees speakers on the wall, would have noticed it.

Not sure how he secured it, but I imagine a hot glue gun would do a dandy job. It would also be easy to take the wire down when you move without ruining the sheetrock.

Regards,
Wayne A. Pflughaupt

My Equipment List
“A nice mid-fi system,” according to an audiophile acquaintance.

My Tech / DIY Articles and Reviews

#3 of 4 OFFLINE   David_Rivshin

David_Rivshin

    Second Unit

  • 352 posts
  • Join Date: Dec 13 2001

Posted March 18 2005 - 03:19 AM

I agree with Wayne, get some standard "thin & white" speaker wire and run it along the corners, ceiling, and floor as necessary. What I've used in the past to keep it in place are small brad nails put in right between the two wires in the cable. Of course be very careful not to actually pierce one of the wires, but just go between the insulation. If the nailhead is visible because of some reflected light, a bit of non-gloss paint on the end should fix that.

I find that the monster "navajo white" speaker cable is a pretty good color match for the cheap generic "antique white" paint often used in apartments. I see bestbuy now carries equivalent AR speaker cable for about half the price, which might be a similar color.

The PartsExpress stuff is a brighter white, and might be a better color match in some cases. It's also braided, which makes it much easier to fit into binding posts without fraying. Of course that also makes it a real pain to get into the RadioShack banana plugs I like (have to unbraid the end), but you can't win them all.

In most cases these types of speaker cables have paintable insulation, so if you've got matching paint, just buy whatever you like and paint the whole thing.

One important thing to keep in mind is that alot of people are just completely oblivious to what's on your walls or ceiling. In my last apartment I had large black surround speakers (JBL S36's) on the white walls, one of which was in the middle of a wall with the wire just going straight up from the floor. I've had people come in there and not even notice the speakers, until they'd notice some surround effect they'd look over to the side perplexed and say "oh, I didn't realize you had surround sound." So even if you think some wire is alittle obvious and not so great looking, most other people won't notice a thing, so don't obsess over it too much.

Hope this helps,
-- Dave

#4 of 4 OFFLINE   Dean_S

Dean_S

    Second Unit

  • 261 posts
  • Join Date: Feb 04 2004

Posted March 18 2005 - 04:23 AM

In most of the apartments I've lived in I could easily tuck 16ga zip cord under the baseboards. In some areas the carpet wasn't cut well and I needed to pull up the edge of the carpet and then tuck the wire under the board but I was always able to hide the wiring this way without releasing the carpet from the tack strip. Doorways can be a problem but a fishtape and some patience works.