-

Jump to content



Sign up for a free account!

Signing up for an account is fast and free. As a member you can join in the conversation, enter contests and you won't get the popup ads that guests get. Click here to create your free account.

Photo

Factory System


This topic has been archived. This means that you cannot reply to this topic.
3 replies to this topic

#1 of 4 Jeremy_Watson

Jeremy_Watson

    Stunt Coordinator

  • 249 posts
  • Join Date: Jul 30 2002

Posted October 13 2004 - 01:56 AM

Is there a website or some easy way to figure out specs for factory car stereos. For example, I have an Eagle Vision with the Infinity sound package, and would like to know about the deck because I need to get new speakers.

Thanks,
Jeremy

#2 of 4 David.G

David.G

    Stunt Coordinator

  • 123 posts
  • Join Date: May 07 2004

Posted October 13 2004 - 04:49 AM

just look at Infinitys lowest end speakers and thats a rough guess, usually a little lower than them but i'd say 75RMS max for larger speakers and 50RMS for 5.25s and say 20RMS max for tweets.
David is the car audio guy, Jason is the home audio so if you see a post in car audio thats David, if in Home thats more than likely Jason. Confusing isn't it!!! Also i hope i am allowed to put my sounddomain down on my equipment page. Its car audio but you guys might enjoy it.

http://members.sou...

#3 of 4 KenWong

KenWong

    Stunt Coordinator

  • 206 posts
  • Join Date: Nov 15 2003

Posted October 13 2004 - 09:50 AM

I doubt the deck puts out that much power... 30-40 RMS is probably what they're being ran out right now. I wouldn't really worry too much about how much power your deck is putting out, you should be more concern with the ohms that it's being ran out. I just sold some speakers to a camaro with blown speakers, he had a monsoon system, which is a pretty good stock system, however his speakers and system was wired to a 2 ohm load, so even though he picked up some descent speakers, his power was pretty much cut to half, and his volume wasn't as loud anymore. So I would check that out first, before making a decision on your speakers.

#4 of 4 David.G

David.G

    Stunt Coordinator

  • 123 posts
  • Join Date: May 07 2004

Posted October 15 2004 - 12:16 PM

o i rated the max RMS for speakers, as far as decks go, look no farther than 15RMS for a factory. 30-40RMS is a high rating from a HU, and if you have a add-on amp i'd say 25RMS and thats about it. If you get aftermarket speakers to run off the HU coaxials are all you'll be able to run, no components (unless they're 4in component set).
David is the car audio guy, Jason is the home audio so if you see a post in car audio thats David, if in Home thats more than likely Jason. Confusing isn't it!!! Also i hope i am allowed to put my sounddomain down on my equipment page. Its car audio but you guys might enjoy it.

http://members.sou...