-

Jump to content



Photo

BFD frequency points...?


This topic has been archived. This means that you cannot reply to this topic.
2 replies to this topic

#1 of 3 OFFLINE   chris hunigan

chris hunigan

    Extra

  • 17 posts
  • Join Date: Jan 04 1999

Posted February 19 2001 - 08:11 AM

To all of the BFD owners,
I was wondering where you placed your freq points where you cut or boosted your levels. For example, you boosted or cut 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75 Hz, which contains one channel of the BFD. I know that each room "Is not created equal", but I want to get a good idea on the type of approach that you went with....

cree

#2 of 3 ONLINE   Patrick Sun

Patrick Sun

    Studio Mogul

  • 37,754 posts
  • Join Date: Jun 30 1999

Posted February 19 2001 - 09:02 AM

It's totally dependent on your frequency humps within your room. There's no hard or fast rule as to where the frequencies that need to be tamed should be set.

------------------
PatCave ; HT Pix ; Gear ; Sunosub I + III ; DVDs ; LDs
"Jee-sus, it's like Iwo Jima out there" - Roger Sterling on "Mad Men"
Patcave | 2006 Films | 2007 Films | Flickr | Comic-Con 2012 | Dragon*Con 2012

#3 of 3 OFFLINE   Deane Johnson

Deane Johnson

    Supporting Actor

  • 528 posts
  • Join Date: Jan 27 1999

Posted February 19 2001 - 10:08 AM

Patrick said it all.

For instance, my major correction was to remove a 16 db spike (or room hump) at 42 Hz. I think most rooms probably have a spike somewhere. But a larger room may have a lower spike and a smaller room higher. What someone else does would have no bearing on what is needed in your situation.

You should run the frequency sweeps in your room, measure them and correct accordingly. Otherwise, you're doing yourself more harm than good with a BFD.

Deane