Jump to content



Sign up for a free account to remove the pop-up ads

Signing up for an account is fast and free. As a member you can join in the conversation, enter contests and remove the pop-up ads that guests get. Click here to create your free account.


Photo
- - - - -

Zone 2 on Denon AVR3600 question


  • You cannot start a new topic
  • Please log in to reply
1 reply to this topic

#1 of 2 OFFLINE   PaulDA

PaulDA

    Screenwriter



  • 2,621 posts
  • Join Date: Feb 09 2004
  • Real Name:Paul
  • LocationSt. Hubert, Quebec, Canada

Posted March 23 2004 - 02:55 AM

I just picked up a Denon AVR3600 (from my cousin) as a secondary system. We will be buying a house in the fall and finally all my gear will be in the same domicile. Right now I have this setup In our temporary residence in Ohio: Sony WEGA 27" (non HDTV) w/16x9 "cheat" Integra DTR6.4 receiver Sony DVD/VCR combo Denon DCD-460 CD player (still going strong after 15 yrs) Aiwa AD-F800 cassette deck (a fine machine in its day) Harman Kardon HKTS6 sat/sub system a pair of Boston Acoustics VR-M60s on layaway:BA VR-M50s, VRC, PV900 In storage: Sony WEGA 32" (non HDTV) w/16x9 "cheat" Denon AVR3600 receiver JVC 2900 S-VHS VCR Denon DRM-550? cassette deck (came with AVR3600) on loan to a friend: a pair of Celestion DL6 bookshelf speakers (mid-80s vintage) still to buy: a universal DVD player (likely Denon 2200/2900) My primary set up will be (in dedicated basement theatre room): Integra DTR 6.4 JVC S-VHS "universal player" Boston Acoustics speaker set Aiwa cassette deck 32" Sony My secondary set up will be (in main living room): Denon AVR3600 27" Sony Sony DVD/VCR combo Denon CD player Denon cassette deck My question is this (sorry about the long list, I've never properly inventoried my gear): What I thought of doing was installing the HKTS6s (8 ohms) as the 5.1s and using my Celestions in zone 2 (probably in the dining room). However, the Denon manual for the 3600 is unclear (to me) about setting up zone 2 speakers. I don't have it with me in Ohio but I read it over the weekend and the A/B wiring on the back panel suggests a bi-wiring configuration (can't do it with the speakers involved) or running A+B speakers (for which a 16ohm rating is DEMANDED--also not doable with speakers involved). Is this really the way it is or is the manual unclear? I used to have a Denon AVR1600 (sold it to my brother in law--replacing it with the 3600) and it had a feature I really miss, a speaker A/B,A+B selector. (My Integra lacks this also, regrettably). Does anyone know if I can get the 3600 to work like the 1600? I remember years ago having my Celestions (8ohms) hooked up to my roommate's old Pionneer receiver (late 70s vintage), along with his pair (I don't remember the type), and we didn't look at things like ohms. We just hooked them up, fired up the system and ran it for years. AVRs seem a bit more finicky these days, compared to the "good old days" of stereo, so I'm concerned about blowing things up (had that happen to me twice with a new Arcam AVR200 a few weeks ago). Is this 16 ohm thing a serious concern? Buying additional speakers is not an option. Only other way I'd do this is to hook up the Celestions as the mains and try to blend them with the HKs, but I fear the results will be, well, less than satisfactory. (Perhaps if I go with a phantom centre setup, that might work). Any ideas?
Never try to teach a pig to sing. It wastes time, and it annoys the pig.

#2 of 2 OFFLINE   PaulDA

PaulDA

    Screenwriter



  • 2,621 posts
  • Join Date: Feb 09 2004
  • Real Name:Paul
  • LocationSt. Hubert, Quebec, Canada

Posted March 23 2004 - 08:20 AM

No Denon AVR3600 owners out there?
Never try to teach a pig to sing. It wastes time, and it annoys the pig.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users