1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

Yamaha DSP A1000

Discussion in 'AV Receivers' started by Thira, Jun 27, 2004.

  1. Thira

    Thira Active Member

    Joined:
    Mar 26, 2003
    Messages:
    40
    Likes Received:
    0
    I have an old AV unit, the DSP A 1000 which was not being used. I had decided to sell it, and hooked it up today to try it out. The unit powers on, and plays a CD for a few seconds before powering off. I opened the unit and replaced the 10A 250 volt ceramic fuse with the same results. I noticed two 7A 125 fused which look fine to me. Any suggestions how to get this unit functional before I trash it?
    Thanks
     
  2. Wayne A. Pflughaupt

    Wayne A. Pflughaupt Well-Known Member

    Joined:
    Aug 5, 1999
    Messages:
    6,040
    Likes Received:
    17
    Location:
    Katy, TX
    Real Name:
    Wayne
    If the speakers you're using are 4-ohm, that might explain the problem. Use only 6 or 8-ohm speakers.
     

Share This Page