I just purchased a new Sony Wega KV-27FS100L from Best Buy. When viewing an anamorphic DVD in 16:9 mode through the component inputs, several fine flickering horizontal lines appear in the picture, particularly visible on white backgrounds. Sometimes a black line is quite visible in the middle of the screen. This flickering is not present when the DVD player is connected using the s-video input or RCA input. I have tried two different DVD players (Toshiba SD-1600U and SD-1800U) and both exhibit the same problem. I have tried two different component cables (Monster Cable MV1CV-2M and Acoustic Research AP090) and both exhibit the same problem. Non-anamorphic DVDs play fine through the component cables (unless the TV is set to 16:9 which it should not be). Anamorphic DVDs play fine when the DVD player is set to 4:3 mode and the TV is not in 16:9 mode. The flickering horizontal lines are not present on anamorphic DVDs when the DVD player is set to 16:9 mode, until the TV is set to 16:9 mode (which it should be). I have tried connecting only the component cable and removing all other inputs from the TV and DVD player, but that had no effect. I think I have isolated the problem to the component inputs and the TV 16:9 mode combination. I accessed the service menu and tried adjusting the values for the 16:9 items, but that had no effect. Should I try some other setting in the service menu, have a Sony technician look at the TV, exchange the TV, or return the TV and try a Toshiba instead? Thanks for your help.