What's new

Twin Towers BUILD LOG (1 Viewer)

kryptonitewhite

Stunt Coordinator
Joined
Feb 4, 2009
Messages
96
Real Name
jordan powell
so I got the best girl in the world.. i have 3 gal friends, but 2 have been fallin back on their word.. was supposed to get some help painting and picking blinds..but ya know, i

don't care about looks one bit...I care about the builds. This girl been getting her butt kicked helping unload wood and building. I had her cut the cone out for the recone, and

she said "shouish!" I'm a selfish pos.. :( she sliced/stabber herself right after I said it and blood squirted everywhere. The cut was deep...but she was a trooper. She refused

the hospital but i made her. No stitches, it was a big clean cut so it went back together nicely...put a strip on and sent us home. I owe this girl my life she done so much for

me.

So we get home and she picks the knife back u and says "now what?" so we finished cutting the cone off and went to bed :)

CIMG0268.jpg


CIMG0269.jpg


CIMG0270.jpg


CIMG0271.jpg


CIMG0272.jpg


CIMG0273.jpg


CIMG0274.jpg


CIMG0275.jpg


CIMG0276.jpg


CIMG0277.jpg


CIMG0278.jpg


CIMG0279.jpg


CIMG0280.jpg


CIMG0281.jpg
 

garlantinapple

Auditioning
Joined
Jul 8, 2010
Messages
1
Real Name
Tina Galbraith
ported and tuned to 15Hz most likely. See the Car Audio section for it's build log! Lots of bateries and amps going in there, and some Adire Audio Extremis 6.4's and CSS FR125S's! 10X's the power needed...
 

kryptonitewhite

Stunt Coordinator
Joined
Feb 4, 2009
Messages
96
Real Name
jordan powell
http://www.avsforum.com/avs-vb/showthread.php?t=1231247&page=11


So my lady wants me to build some ugly stairs to go with the ugly clown room, and I wanted to test the Towers to see how much of the flex is pressure VS driver vibration... if it's mostly pressure and I need to brace all 6 sides, I need a minimum of 40 2"x4"s, 8 front to back each, 8 side to side each, 4 center to top each. But I put some white stickers in diff spots to see if it was the same flex all over or just by the driver. Lucky me! 24Hz is where it is worst, but a few Hz in each direction and flex is minimal.


Took the drivers out of the 10 cube box, put them back in the towers.


CIMG2606.jpg



CIMG2607.jpg



CIMG2608.jpg



Ill most likely put the 2nd driver's on the inside top


CIMG2610.jpg



otherwise outside top


CIMG2611.jpg




here's the vibration vid


[media=youtube]JbF-8Xkp29I[/media]


CIMG2669-1.jpg



CIMG2670.jpg



[media=youtube]H1-cKhMc_Vk[/media]


[media=youtube]_zImk1VDAXY[/media]


[media=youtube]pl7AaWfVmjM[/media]


CIMG2974.jpg



CIMG2975.jpg



CIMG2976.jpg



CIMG2977.jpg



CIMG2978.jpg



CIMG2979.jpg



CIMG2980.jpg



CIMG2981.jpg



CIMG2982.jpg



CIMG2983.jpg



CIMG2984.jpg



CIMG2985.jpg



CIMG2986.jpg



CIMG2987.jpg



CIMG2988.jpg



CIMG2989.jpg



CIMG2990.jpg



CIMG2991.jpg



CIMG2992.jpg



CIMG2993.jpg



CIMG2994.jpg



CIMG2995.jpg



CIMG2996.jpg



CIMG2997.jpg



CIMG2998.jpg



CIMG2999.jpg



CIMG3000.jpg



CIMG3001.jpg



CIMG3002.jpg



CIMG3003.jpg



CIMG3004.jpg



CIMG3005.jpg



CIMG3006.jpg



CIMG3007.jpg



CIMG3008.jpg



CIMG3008.jpg



CIMG3009.jpg



CIMG3010.jpg



CIMG3011.jpg



CIMG3014.jpg



CIMG3015.jpg



CIMG3016.jpg



CIMG3017.jpg



CIMG3018.jpg



CIMG3019.jpg



CIMG3020.jpg



CIMG3021.jpg



CIMG3022.jpg



CIMG3023.jpg



CIMG3024.jpg



CIMG3025.jpg



CIMG3026.jpg



CIMG3027.jpg



CIMG3028.jpg



CIMG3029.jpg



CIMG3030.jpg



CIMG3031.jpg



CIMG3032.jpg



CIMG3034.jpg



CIMG3035.jpg



CIMG3036.jpg



CIMG3037.jpg



CIMG3038.jpg



CIMG3040.jpg



CIMG3041.jpg



CIMG3042.jpg



CIMG3043.jpg



CIMG3044.jpg



CIMG3045.jpg



CIMG3046.jpg



CIMG3047.jpg



CIMG3048.jpg



CIMG3049.jpg



CIMG3050.jpg



CIMG3051.jpg



good.jpg



good-1.jpg




my camera sucks, trying to clean it with rubbing alcohol


CIMG3155.jpg



CIMG3156.jpg



CIMG3157.jpg



CIMG3158.jpg



Of course speaker placement changes everything, I knew that, but my initial plan was ordering six 21" Maelstrom-X's and 14 Anarchy's, doing seven MTMs for 7.1 surround. To get me buy until then I was just gonna use those cheap walmart cubes, but they work surprisingly well and I just can't afford better for now. They are HIDEOUS and one has a bad stain, so I tuked them back into the entertainment center to hide them. Well with the added two 18's my substage SQ went way up, so Ive been doing more critical listening (sure those cubes are as bad as it can get, but the receiver sure milks them for what they're worth) and I just couldnt take the "tunnel vision" from them being 3' deep between the towers.


I brought them out, real ugly I know, but OMFG! I had to back things down 2dB off the batt, but even my woman looked at me right away like "wow, did that really just happen? Did that really change things that much?" Cuz now it's actually surround, not mono muffled :D


The surrounds faced forward, were hard to hear, now theyre standing out like they should.


CIMG3217.jpg



CIMG3218.jpg



CIMG3219.jpg



CIMG3220.jpg



CIMG3221.jpg



CIMG3222.jpg




Thats silly string all over, the black lights and colored lights light it up... looks cool in person, dirty in pics


so 2 of my gaskets were warped from sitting outside and were rubbing the surrounds so I took em off. I get the new 4 any day now, Ill put the new ones in the HT and use these in the van. built shelves to set stuff on on the sides of the bleechers. wish I couldda got the crackhead to help with that back during summer, much better


CIMG3223.jpg



CIMG3224.jpg



CIMG3227.jpg



CIMG3228.jpg



CIMG3229.jpg



CIMG3230.jpg



CIMG3231.jpg



CIMG3232.jpg




speaker placement means everything


CIMG3233.jpg



CIMG3234.jpg



got the four 18's today for the VAN, decided to put them in the towers cuz I am getting serious buzzing I hope the new gaskets will cure, and my reconing job was as pretty as my speaker stands :D


CIMG3235.jpg



CIMG3236.jpg



CIMG3237.jpg



CIMG3238.jpg



CIMG3239.jpg



CIMG3240.jpg



CIMG3241.jpg



CIMG3242.jpg



CIMG3243.jpg



CIMG3244.jpg



CIMG3245.jpg



CIMG3246.jpg



CIMG3247.jpg



CIMG3274.jpg



CIMG3275.jpg



CIMG3276.jpg



CIMG3277.jpg



CIMG3278.jpg



CIMG3279.jpg



CIMG3284.jpg



CIMG3282.jpg
 

kryptonitewhite

Stunt Coordinator
Joined
Feb 4, 2009
Messages
96
Real Name
jordan powell
This platform grabs the ULF flop from the subs quite well, other than that this thing is totally unphased by four 18's and two 12" ports and people jumping up and down, back up, back down all day long day after day, but there's just one activity that always worries me so i finally had to do sumthin bout it :)

CIMG3360.jpg


CIMG3361.jpg


CIMG3364.jpg


CIMG3365.jpg


CIMG3366.jpg


CIMG3367.jpg


CIMG3369.jpg


CIMG3370.jpg


CIMG3371.jpg


CIMG3372.jpg


CIMG3373.jpg


CIMG3374.jpg


CIMG3375.jpg


CIMG3376.jpg


CIMG3377.jpg
 

Robert_J

Senior HTF Member
Joined
Aug 22, 2000
Messages
8,350
Location
Mississippi
Real Name
Robert
Originally Posted by kryptonitewhite

no luv
Fix your pictures and it might help.

[/QUOTE]


its the same as I mass copy/paste everywhere else :(


All I get is a picture not found message from Photobucket on every link.
 

kryptonitewhite

Stunt Coordinator
Joined
Feb 4, 2009
Messages
96
Real Name
jordan powell
how about vids then


The Last Samurai

ready, aim, fire at will


gatling gun


gatling


2nd round canon fire


2nd, third, and fourth round canon shots


The problem with Xmen Origines: Wolverine, is that it's LFE seems to be recorded low-level to begin with... I can watch the whole thing at -18dB master +12dB sub, or almost all of it at -15dB master +12dB sub... only movie I can do that with. On top of that, it seems HP'ed the only reason I have to turn it down on a cpl parts is the midbass/high bass is insane and kills my voltage. This movie is PACKED with ULF, packed with single digits. But it is at such a low level, and, much lower than the rest of the LFE. It is simply over run by mid/high bass.

Im gonna post vids of the final fight scene where X11 has super reappearing powers... most of the movie is not like this, yet still very subsonic.

The almost grand finalley



Xmen Geart Stuff! black cowboyX11 (IDKY I keep saying top plate, not bottom)



Xmen Great Stuff black cowboy X 11 v2



Xmen jus keeps on comin



Xmen great ULF at beginning, then recorded way too long after





Jim Jones ft. Hell Rell - Pour Wax



Caprica The Heavens Will Rise Season 1 Ep 16 INTRO

less than 4Hz FULL EXCURSION from a TV series on HULU!!!!!!!!!!!!!!!



Beethoven Wellingtons Victory Op 91 7Hz explosions



Caprica The Heavens Will Rise Season 1 Ep 16 4min11sec to 4min37sec



Caprica Dirteaters Season 1 Ep 15 42min 49sec



Caprica Blowback Season 1 Ep 14
3 solid minutes of single digits



Flashforward No More Good Days Season 1 Ep1 10min20sec to 13min through commercial



I was finishing up todays vids of HULU shows, the GF and her son were in the other room watchin the news, I wanted to give them 10Hz anxiety...they started yelling. 10Hz sine wave kills tv reception. Those fan blades look like theyre only moving an inch or two, theyre moving almost 4"!



These are from before i had four eighteens

7Hz
Fringe: Amber 31422 Season 3 Ep. 5 13:27

The lowest output I have had yet, from a TV show on HULU.com



Above clip spectrographed

here is the bit at the timestamp that you requested:




Fringe
The Plateau 27:40
 

Adam Gregorich

What to watch tonight?
Moderator
Reviewer
Senior HTF Member
Joined
Nov 20, 1999
Messages
16,530
Location
The Other Washington
Real Name
Adam
Somehow the image tag got to be part of your URL. OK I see what happened. You pasted everything over from AVS which uses BBCode. We use HTML, so the
 

kryptonitewhite

Stunt Coordinator
Joined
Feb 4, 2009
Messages
96
Real Name
jordan powell
Originally Posted by dmiller68

Your most likely exceeding your photobucket bandwidth.


Ive dne that quite a bit, I have three separate bucket accounts that I alternate from to spread things out, but when people brouse them more...weekends/holidays, bandwidth gets exceeded one in a while....but for the method of copy/pasting this and 1 other foru they dont show up on, all the others they are. The exceeded bandwidth should be cleared up again though
 

Adam Gregorich

What to watch tonight?
Moderator
Reviewer
Senior HTF Member
Joined
Nov 20, 1999
Messages
16,530
Location
The Other Washington
Real Name
Adam
No problem. It makes it easier to use when its all here for people to look at without needing to leave the page. As to the picture links, It all depends on how you want things to look.


The first two links work fine for linking to your pictures. The third link is the right idea, but it is the actual html code and shouldn't be posted like that. If you want to use it, hit the source button on the upper right of the reply or edit box and paste it in--its the same thing as hitting the insert picture button on the toolbar and pasting in the link to the picture. This is what it will look like:





The forth link is the BBCode that works at AVS, and doesn't work here. All your links that don't work in this thread are this type of link.
 

Users who are viewing this thread

Latest Articles

Forum statistics

Threads
356,815
Messages
5,123,808
Members
144,184
Latest member
H-508
Recent bookmarks
0
Top