1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

trying to get tv set up.. help please.

Discussion in 'Displays' started by shortz1994, Aug 23, 2011.

  1. shortz1994

    shortz1994 New Member

    Joined:
    Aug 23, 2011
    Messages:
    2
    Likes Received:
    0
    Our neighbors were moving out, so while helping they had a big 53" rear projection. (philips). they gave it to my family as a payment for helping. i got it home plugged it in, an it's all out of wack, color is off, convergince is off in one corner, an there are lines in it some time. so i started to mess with the settings. (no remote).. got the picture to straiten up a little, an took the back off, readjusted the three colors, (focused). an went into menu to do convergence. got to the end, after getting all the + marks lined up. but now can't save the settings, cause no remote. is there a manual way to get the + marks lined up, with out the remote? i have seen there are a couple of adjusting places for adjusting.:huh: thanks for your help..
     
  2. GeorgeAB

    GeorgeAB Well-Known Member

    Joined:
    Jan 28, 2001
    Messages:
    482
    Likes Received:
    7
    Location:
    Denver, CO
    Real Name:
    G. Alan Brown
    A good start along the way of getting help is to provide the model number of the TV.
     
  3. shortz1994

    shortz1994 New Member

    Joined:
    Aug 23, 2011
    Messages:
    2
    Likes Received:
    0
    sorry it's a philis/magnavox. model # 9P5034 C103 . i hope this helps. thank you
     

Share This Page