1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

Toshiba 56 Point Convergence Clarification

Discussion in 'Displays' started by Cameron Yee, May 1, 2003.

  1. Cameron Yee

    Cameron Yee Executive Producer
    Reviewer

    Joined:
    May 9, 2002
    Messages:
    11,293
    Likes Received:
    506
    Location:
    Since 2006
    Real Name:
    Cameron Yee
    I've started looking at the procedure for doing service (56 pt) convergence and have peeked at the grid. If I understand the instructions correctly pushing 100, 0 and ENT turn off the red, green and blue CRTs, respectively. However, when I push ENT nothing seems to happen and pushing the others results in either a magenta, cyan or white grid. None of the instructions I've found provide information about what I should be seeing so any clarification would be appreciated.
     
  2. Jeff Gatie

    Jeff Gatie Lead Actor

    Joined:
    Aug 19, 2002
    Messages:
    6,531
    Likes Received:
    15
    Pushing "ENT" is not the right button for the blue CRT. I forget which one it is.

    Checking Keohi . . .

    http://www.keohi.com/keohihdtv/brand...manualtip.html

    Yes, now I remember that the later (xxH80) models used the "Ch Rtn" button instead of "ENT", try that instead.
     
  3. Michael TLV

    Michael TLV THX Video Instructor/Calibrator

    Joined:
    Mar 16, 2000
    Messages:
    2,909
    Likes Received:
    1
    Location:
    Calgary, Alberta
    Real Name:
    Michael Chen
    Greetings

    ch rtn ...

    regards
     

Share This Page