1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

Theater Update - Almost done framing

Discussion in 'Home Theater Projects' started by ScottATL, Jan 11, 2005.

  1. ScottATL

    ScottATL Well-Known Member

    Joined:
    Jan 7, 2003
    Messages:
    114
    Likes Received:
    0
    Well, I didn't get as much done over the holidays as I wanted to, but I did get all of the framing finished on the walls, and the bulkheads built in the theater room and the game room. I still have to do the two smaller rooms, which will be cake now that the two larger rooms are finished and I'm "experienced".

    Here are a couple of pics. The room with the three cutouts is going to be the game room. I built the walls on the floor and fastened a 2x4 running horizontally across the top and bottom of the wall. I did this 12 inches from the top and bottom. If you do this, pay attention as to where you want your electrical boxes, I did it at 12 inches as that is the distance I want the boxes from the floor and will put the top of the stud with the bottom of the box. This will make wiring and cabling a snap. Oh, another thing I did was fastened the sheet rock to the back of the wall for the inserts, will save some time on cutting and getting it in the cutouts later down the road.

    [​IMG]

    http://www.jhooligans.com/jan5_02
    http://www.jhooligans.com/jan5_03
    http://www.jhooligans.com/jan5_04
    http://www.jhooligans.com/jan5_05

    Just had a new baby last week, so I hope to get the odds and ends on the framing complete and the bulkheads that are built for the game room fastened up. This is about a half day job, I'm still thinking over the bar/lounge with ideas, so I'll probably take a week or so and finish my design on that before doing the framing, probably save it for next week.
     
  2. Dave Poehlman

    Dave Poehlman Well-Known Member

    Joined:
    Mar 8, 2000
    Messages:
    3,817
    Likes Received:
    0
    Looks great! And congrats on the baby!

    I like the alcoves.. I'm guessing movie posters are going in there?

    Keep the pics coming!
     
  3. Mark McGill

    Mark McGill Well-Known Member

    Joined:
    Feb 20, 2002
    Messages:
    84
    Likes Received:
    0
    Looks good except for one thing. Unless codes are different in your area, it is considered a no no to attach anything to the side walls. It is just asking for problems due to moisture. Yes I know it doesn't make sense, becuause the floor is in contact, but that's what our codes say. May I ask why you needed to do it that way? If the top sill is nailed into the joice and the bottom sill is nailed with a Hilti or other device, you wouldn't need to use the side walls. Good luck and check you codes.
     
  4. ScottATL

    ScottATL Well-Known Member

    Joined:
    Jan 7, 2003
    Messages:
    114
    Likes Received:
    0
    Codes say that anything on the floor must be treated lumber, but the sides don't have to be, as long as they are water sealed. Just for safeguard, I had extra treated lumber and used that to fasten most of them to the sides. For the ones that aren't, it wouldn't be difficult to change it to treated if an inspector makes me change it.
     
  5. Travis_R

    Travis_R Well-Known Member

    Joined:
    Oct 27, 2002
    Messages:
    247
    Likes Received:
    0
    scott, the framing looks great man, and congrats on a healthy baby girl, I myself have been tearing my kitchen apart, one of these days its all going to be done
     

Share This Page