1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

Test Tone CD burnt. Now what?

Discussion in 'AV Receivers' started by wooly, Mar 6, 2011.

  1. wooly

    wooly Member

    Joined:
    Mar 5, 2011
    Messages:
    7
    Likes Received:
    0
    Excuse me if this sounds like I don't know what I'm doing because I don't.


    I have the radio shack SPL meter. I am able to adjust each speaker according to the test tones on the amp (Harman Kardon) but now I'm getting into it a little farther but that's where I need some help.


    I burn't a test tone CD with all the frequencies from 10hz up to 300hz. along with a pink noise generator. I know that somehow you use this to fine tune your system but I having a hard time understanding it because I'm not sure what I'm doing, What exactly is the purpose of a test tone cd and how does one achieve the end result so that my system is at it's best performance?


    Could someone give me some instructions as to what I should be doing in plain, not to tech language or direct me to a web site? This is new to me. I'm from the day when you had On, Off, tone and volume and that was it.


    Thanks
     

Share This Page