1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

Still calibrating RXV-800/Speakers: Help with Dolby Dig set and DTS LFE Level adjustments, please.

Discussion in 'AV Receivers' started by flycaster, Jan 30, 2013.

  1. flycaster

    flycaster Well-Known Member

    Joined:
    Jun 18, 2009
    Messages:
    90
    Likes Received:
    0
    On page 42 of the Yammy manual, are the instructions for setting DD LFE Level (10A) and DTS LFE Level (11). I am having trouble understanding how to implement the signal (put on test tone when in 10A/11?) and how to adjust the level once the signal is running? Is this just for sub adjustment or for all speakers? Thanks.
     
  2. Brainwasher

    Brainwasher Well-Known Member

    Joined:
    Dec 21, 2012
    Messages:
    168
    Likes Received:
    0
    Location:
    Southern California
    Real Name:
    Luke
    It would help to know your speaker type/setup.
     
  3. flycaster

    flycaster Well-Known Member

    Joined:
    Jun 18, 2009
    Messages:
    90
    Likes Received:
    0
    All 10 year old Paradigms SubW...PDR-10 CC...CC170 Mains...Monitor V3 Rears...Cinema V1
     

Share This Page