1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

Speaker stands and speaker cables

Discussion in 'Archived Threads 2001-2004' started by Matt Butler, Jul 4, 2001.

  1. Matt Butler

    Matt Butler Screenwriter

    Joined:
    Jun 23, 2001
    Messages:
    1,921
    Likes Received:
    1
    Im looking for both of these items. I need about 100ft of cable and my fronts are sitting on the floor right now. I dont have a lot of cash right now but I need these items. Any help would be nice.
    Thanks friends,
    Matt
     
  2. Bob McElfresh

    Bob McElfresh Producer

    Joined:
    May 22, 1999
    Messages:
    5,183
    Likes Received:
    0
    Sounds like you are a canidate for the $0.49/ft HomeDepot 12 ga speaker wire.
    As far as stands go..how high do you need? You can often get great results just getting the speakers up off of the carpet. This can be done with spikes, wooden dowels, etc.
    One guy went to a nearby tile place and got 2 18" ceramic tiles which he placed under the feet of each speaker. He also found placing some coins under the front feet gave him a nice tilt which (to him) improved the sound.
    The trick is to de-couple the speaker from the carpet or platform it is sitting on. Rubber door wedges, or pink-rubber erasers from the stationary section have all been used to good effect. It may not LOOK so good, but it is inexpensive and a fun thing to do for a few hours.
    Good Luck.
     
  3. Chad Isaacs

    Chad Isaacs Supporting Actor

    Joined:
    Feb 20, 2000
    Messages:
    763
    Likes Received:
    0
    Concrete blocks always work well for cheap speaker stands.Just get some black material and wrap them,duct tape in the back and your set.
    If that doesent get your attention,I made shelves simmilar to Mike Knapps.They are for my rear speakers but would work equally as well as fronts,just make sure to get a long enough nipples so the speakers are out from the wall.One thing to remember,the longer the nipple,the larger the pipe and fitting need to be in diameter or else they might sag.
    ------------------
     

Share This Page