1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

Sonicaps and wiring polarity question...

Discussion in 'Home Theater Projects' started by JamesThompson, Jan 13, 2004.

  1. JamesThompson

    JamesThompson Active Member

    Joined:
    Nov 4, 2002
    Messages:
    44
    Likes Received:
    0
    I'm full swing into building my A/V-3S center channel speaker and will be assembling the crossover tonight. While looking at the Sonicap capacitors that came with the kit, I can not tell the polarity of either end. Doesn't capacitors have polar ends (+ / -)? If so, what are the identifying marks on the sonicaps? If not, just call me a dufus. [​IMG]
     
  2. Brian Bunge

    Brian Bunge Well-Known Member

    Joined:
    Sep 11, 2000
    Messages:
    3,719
    Likes Received:
    0
    Some caps have to be wired with a specific polarity but not all of them. The Sonicaps can be wired either way so don't worry about it.

    If you drive up to Cocoa Beach and buy me a new Ron Jon's shirt I won't call you a dufus! [​IMG]
     
  3. JamesThompson

    JamesThompson Active Member

    Joined:
    Nov 4, 2002
    Messages:
    44
    Likes Received:
    0
    Thanks Brian. I was hoping that was the answer. [​IMG]

    Too cold to go get a shirt. Dipping into the 60's through the day here lately. [​IMG]
     
  4. Brian Bunge

    Brian Bunge Well-Known Member

    Joined:
    Sep 11, 2000
    Messages:
    3,719
    Likes Received:
    0
    James,

    Better break out the parka![​IMG]
     

Share This Page