1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

Setting up a projector in bedroom

Discussion in 'Beginners, General Questions' started by RussPang, Jul 12, 2005.

  1. RussPang

    RussPang Member

    Joined:
    Jul 11, 2005
    Messages:
    10
    Likes Received:
    0
    Hi, just joined the site!

    My wife and I do most of our TV and movie watching in our bedroom, so this post pertains to the equipment therein.

    My Mitsubish WT-42311 started acting up last week and now it won't stay on when powering up. Evidently, the power unit may need to be replaced. Since we are in the hurricane Dennis-impacted area, the local shop said it will be a minimum of 3-6 weeks before he could get to it and will likely cost $350 to $600.

    I thought it would be cool to have a hidden TV that dropped down from the ceiling making it possible for us to have a bigger screen than the Mitsu 42 inch. I did some research (before I found this site) and bought an InFocus 4805. I plan to build cabinets around the head of the bed and make a place for the projector above.

    I do have a question!

    I want a screen that will be approx. 10-11 feet from the headboard. According to InFocus, it seems a 72" diagonal screen would be perfect.

    Can anyone advise me as to the best screen to use for this application? I would like to get a motorized screen and make a soffit for it and my front speakers to reside in but I don't want to spend a lot of money.

    Our room can be made fairly dark so I believe we could run the projector in low mode. I would like to spend under $500 for a motorized screen of this size (43x57)

    Thanks in advance for any help,

    Russ
     
  2. Vince Maskeeper

    Vince Maskeeper Well-Known Member

    Joined:
    Jan 18, 1999
    Messages:
    6,505
    Likes Received:
    0


    Well Russ, how handy are you?

    I think $500 might be a lofty goal.

    Consider that Carada is one of the more 'affordable' suppliers of quality screens and a 76 inch screen from them (non motorized, just screen material and frame) is $450 for their 'precision' and $525 for their 'criterion' line.

    The Da-light deluxe recessed motorized models I've seen in that size start in the $1200 range. Although I think they have their non-recessed models ('cosmo' and 'designer') that are more in the $700 range. These are similar to the old 'pull down' screens you saw in highschool, with a motor attached.

    You should probably start here:
    http://www.draperinc.com/HomeTheater...edlScreens.htm
    and figure out what kind of mount and if you need a tensioned screen or not... that will show you the Draper models and you can probably use that info to look into models from some of the other suppliers (Da-Light, Stewart, etc).

    Depending on your situation and level of DIY ability, you might be able to build something... but if not you should do some reading on various companies, figure out the models that will work for you and then start searching the web for reviews and retailers!

    I have never used them, but there are some 'almost in your ballpark' prices on Cosmo or Designer models here:
    http://www.bigscreencenter.com/

    Hope that helps.

    -V
     
  3. RussPang

    RussPang Member

    Joined:
    Jul 11, 2005
    Messages:
    10
    Likes Received:
    0
    On a scale of 1-10 I would consider myself a 9.75 in DIY ability. I would love the challenge of building a motorized screen. Have many people done this?

    One more question - the screen will be pretty much hanging in the middle of the room, are these pretty weighty so as not to be blown very easily by room pressure of a door closing or very slow ceiling fan?
     
  4. Vince Maskeeper

    Vince Maskeeper Well-Known Member

    Joined:
    Jan 18, 1999
    Messages:
    6,505
    Likes Received:
    0


    Most are weighted to some degree, although, again with a little work you could probably make some minor modifications. There are also tensioned screens which hold it in place a little better.

    You might check the manufacturer site to get the exact numbers on the weights on each screen type...
     

Share This Page