1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

SACD Setup

Discussion in 'Beginners, General Questions' started by Robert_Stephen, Jul 31, 2003.

  1. Robert_Stephen

    Robert_Stephen New Member

    Joined:
    Jul 28, 2003
    Messages:
    1
    Likes Received:
    0
    Hi all,
    First let me say this...
    I have read this forum for years and you guys have helped me more than you know, in fact I just purchased a new HT system based on your opinions, so thanks a million!

    OK, my problem;
    I have the DECO Velodyne speaker system, the Sony NS755V DVD/CD player and the H/K AVR 525.
    I finally got the dvd system to work in Dolby and now I'm trying to get the SACD's to play. And I'm haveing the worst time. I do have 6 input cables hooked between the 755 and H/K Reciever, but I'll be dammed if I can get all 5 speakers to work. I can get the L, R, and sub to play but that's it. any suggestions would be greatly appreciated.

    Thanks,
    Robert
     
  2. Frank Zimkas

    Frank Zimkas Well-Known Member

    Joined:
    Mar 10, 2002
    Messages:
    889
    Likes Received:
    0
    1) Make sure all your RCA cables are in good condition.
    2) Make sure that all the RCA connectors are properly seated at both ends
    3) Check your receiver, remote, and manual for a "Multi-Channel Input" function/option/button.

    I know it sounds basic, but sometimes it's the basics that can bite ya!
     
  3. John Garcia

    John Garcia Well-Known Member

    Joined:
    Jun 24, 1999
    Messages:
    11,572
    Likes Received:
    23
    Location:
    NorCal
    Real Name:
    John
    I believe it is number 3 above. You need to be able to select the multi channel analog inputs, which is usually an individually selectable source.

    Are you using a multi channel SACD? If you have a 2ch only SACD, then there is no way to get multi-channel audio from it. What is recorded is what you get since it is analog. If you are using a hybrid multi-channel disc, you may need to check which layer the player defaults to, because it may default to 2ch, despite the multi-channel layer. My 222ES has this setting, so the 755 may also.
     

Share This Page