1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

s video through hi fi amp

Discussion in 'Home Theater Projects' started by buster _bb, Apr 12, 2003.

  1. buster _bb

    buster _bb Member

    Mar 11, 2003
    Likes Received:
    i am not sure if this is the right forum to ask this but i will any way a salesman told me that if i run my projector through the s video on my hi fi amp it can improve picture quality is this true thanks
  2. Eric_R_C

    Eric_R_C Well-Known Member

    Sep 9, 2001
    Likes Received:
    The correct answer is.....maybe.

    First of all, you want to have as few connections between your video source and display device as possible.

    That being said, if you want to have the ability to switch video sources through your receiver, you have to look at the specs of your receiver. Some do a better job of "passing the signal along" than others.

    At best, there will be very little or noticeable signal degradation. I don't know of any receivers that "enhance" the video signal. Some DVD players and DSS receivers have dual s-video outputs, and you might be able to use both, though I assume your projector only has 1 s-video input.

    You are better of just trying it out both ways to see if the difference is noticeable and/or acceptable.

Share This Page