1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

Projector help needed

Discussion in 'Displays' started by CurtJ, May 17, 2008.

  1. CurtJ

    CurtJ Well-Known Member

    Joined:
    Apr 6, 2002
    Messages:
    52
    Likes Received:
    0
    I recently received my Sim2 Domino 30H back from Sim2 after some work was done on it and the settings have been reset. I have it connected by component to my reciever. I have a DVD player, DirecTv HD, Xbox 360, and a Wii. I need help with the settings.

    I am having a hard time decided what will give me the best picture "Normal, Anamorphic, Pixel to Pixel, or LetterBox. If I am using component should I use the 15hz or 35hz setting?

    Also, once I have my image lined up on the screen using the test images I flip over the directv and the image is not lined up?

    Any help would be greatly appreciated. I have dug through the Sim2 manual but it is not very detailed. Thanks
     

Share This Page