1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

pioneer elite pro610hd replace a lenticular screen

Discussion in 'Beginners, General Questions' started by Josh Holladay, Mar 15, 2012.

  1. Josh Holladay

    Josh Holladay New Member

    Joined:
    Mar 15, 2012
    Messages:
    2
    Likes Received:
    0
    Need advice on replacing the lenticular screen on my rear projection tv .how to take the front housing off the tv without damaging it.
     
  2. Adam Gregorich

    Owner

    Joined:
    Nov 20, 1999
    Messages:
    15,522
    Likes Received:
    637
    Location:
    The Other Washington
    Real Name:
    Adam


    Welcome to Home Theater Forum Josh. I have had several Pioneer TVs in the past, including a 610 or 620 (can't remember which). There are gloss black trim strips around the edge of the outer contrast screen. Carefully pry them up at the corners and you can them just peel them back. Once they are off it will expose some screws that are holding in the bottom trim pieces. Once you have the screws out the contrast/glare screen should just lift out. here is where my memory fails me since its been almost 10 years since I have done this. I think once all of that is out you can remove the lenticular screen from the front but I'm not 100% sure.
     

Share This Page