1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

Picture goes black sound stays on

Discussion in 'Beginners, General Questions' started by kk5263, Feb 4, 2014.

  1. kk5263

    kk5263 Member

    Joined:
    Jan 16, 2014
    Messages:
    9
    Likes Received:
    0
    Real Name:
    Ken
    HelloI have a problem with my TV / receiver / Bell HDTV box.When the TV is on the picture and sound is good, then the screen turns blackand up in the top left side of the screen is HBMI 1 , sound stays on when it does this. Some times it looks like the screen is pulsing then goes black. Then it comes right back on and all is fine. This may happen 3 - 4 times in a minute then its OK for a bit.I have tried bypassing the receiver and it still happens. I've tried different combinations but still does the same thing. tighten all the coaxial cable from the dish to the receiver.The HDMI cable to the TV is a Bell cable that came with the box.The TV is a Sony KDL 70R550A , Receiver Yamaha RX-V575 and the Bell HD box 9241.Any help would be appreciated
     
  2. schan1269

    schan1269 HTF Expert
    HW Reviewer

    Joined:
    Jul 4, 2012
    Messages:
    17,038
    Likes Received:
    894
    Location:
    Chicago-ish/NW Indiana
    Real Name:
    Sam
    Try a different HDMI. But it is cable.
     
  3. kk5263

    kk5263 Member

    Joined:
    Jan 16, 2014
    Messages:
    9
    Likes Received:
    0
    Real Name:
    Ken
    Looks like the new rockfish HDMI cables did the job.

    Thanks for your help .....TV ran last night with no problems.

    Thanks again for your help
     

Share This Page